-*-Text-*- F I E L D G U I D E to Qbus and Unibus Modules Revised: July 27, 2002 --------------------------------------------------------------------- Maintained by Megan Gentry with recent comments/corrections from: Chris Doran and Tim Shoppa Originally Compiled and Maintained by Ronald Copley --------------------------------------------------------------------- Introduction This list is an attempt to coalesce all net knowledge on PDP-11 UNIBUS and Qbus modules. It is designed to supercede all the various homespun lists floating around -- giving one solid source of information. An expansion is in progress. In addition to PDP-11 UNIBUS and Qbus, the list will now cover other forms of the PDP-11 such as the Professional Series (CTI-Bus). Further, it will cover not only PDP-11s, but VAXen and MIPS systems as well (VAXen being available in both UNIBUS and Qbus forms, and MIPS machines in Qbus). The list will also begin to include chassis, mounting boxes, power supplies and backplanes. For some non-Digital (third-party) disk and tape controllers, a list of reputedly compatible drives may be shown. This list is not exhaustive, and other similar disk and tape interfaces may also work. This list may be found on the following sites: 1) http://world.std.com/~mbg/pdp11-field-guide.txt As of 02-Feb-2000, when I accepted the offer from the former maintainer to take over the file, this copy has become the official, most up-to-date copy. One thing people may note is that I have renamed it. This is because there is a similar file in the works elsewhere to cover pdp8 modules and options. Comments and suggestions about the format and content of the file will be welcome at all times. Please note that it may take some time for the *new* official file to make it to the mirrors mentioned below. 2) On metalab.unc.edu, in the following location: /pub/academic/computer-science/history/pdp-11/hardware/field-guide.txt Tim maintains quite a large archive of other information, it is most definitely worth checking out -- Thanks, Tim! 3) On ftp.village.org, in /pub/pdp-11/field-guide.txt Dworkin keeps a compressed version here, too. 4) On ftp.update.uu.se in /pub/pdp11/doc/field-guide.txt Johnny's site has quite a plethora of PDP-11 stuff, along with files/software pertaining to Pros and DECmates. This file will be posted on an irregular basis to the PDP-11 related newsgroups (vmsnet.pdp-11, alt.sys.pdp11). In order to ensure that this file is as comprehensive and accurate as possible, please don't hesitate to: 1) Send any additions or corrections you may have to the file maintainer (currently mbg@world.std.com). 2) Feel free to edit a private copy of the file to include your additions or corrections and send it (or a differences file) to the file maintainer. Please be prepared to cite the source of any such information. This is to ensure that the file contains only validated information. Just make sure you send anything you have to me. If you have relevant hardcopy and you don't feel like typing it in, get in contact with me and we'll work something out. - - - - - We owe a great amount of thanks to Tim Shoppa, Johnny Billquist, Dworkin Muller and all others who maintain PDP-11 ftp sites. Also, a great deal of respect is to be accorded to *anyone* attempting to hook a PDP-11 to the net, or running one currently connected, for that matter. The same for anyone, anywhere who *doesn't* put a PDP-11 into the dumpster. Or the smelter. Etc. If you don't know what to do with it, please contact me via email and we'll get the information out to people who would be interested in saving it. We owe final credit and gratitude to Ronald Copley, who developed and maintained this list for numerous years. Thanks *alot*! Credits List (alphabetical order): Joe Allen (author of the amazing JOE!) Randy Betke (Qbus clarifications) Johnny Billquist (11/70 goodies, maintains ftp.update.uu.se ftp site) Ronald Copley (Originally compiled and maintained this document) Eric Dittman (Emulex modules, uVAXen modules) Chris Doran (Corrections, additions) Tony Duell (corrections) Jonathan Elson (Dilog modules list) Megan Gentry (New information, new format, new maintainer) Henk Gooijen (additions) Tom Guptill (maintains lenin.cc.rochester.edu "orphan" computer site) Hans Hamakers (corrections, additions) Lee Havemann (thanks, Lee!!) Bob Hoffman (cleared up Dilog issue) Doug Jones (help in general) Ken Kirkby (video modules, staggering amount of other info) Brian Knittel (additions) Nick Laflamme (loaned a couple of DEC catalogues) Dworkin Muller (maintains ftp.village.org ftp site) Garry Page (LPS11 modules, others) Tim Shoppa (general help, maintains sunsite.unc.edu ftp site) Eric Smith (additions) Alan Sieving (big list, advice, et alia) Emanual Stiebler (corrections, additions) Karl Sipfle (corrections) Pete Turnbull (Qbus modules, mucho PDP wisdom) Mike Umbricht (11/44 goodies, additions) Ken Wellsch (11/20 specifications) Dave Woodman (additions) Mike Yankus (11/84 additions & more) Rudy Zijlstra (UNIBUS module clarifications/additions) Notes: o 'Refs:' indicates documention in which information for the option may be found. o In the BUS column, Q is Qbus, U is UNIBUS, CTI is CTI bus (Professional 300 series). With Vax and MIPS boards being added, there may be some new bus designations such as BI and XMI added here. o EK-xxxxx-yy numbers are documents, with yy = UG for user guide, TM for technical manual, IN for installation manual, RC for reference card, OP for operator's manual, PS for pocket service guide, CG for configuration Guide. (These are only a few examples, not a definitive list). The 'xxxxx' is often, but not always, the option name. o MP-xxxxx numbers are maintenance printsets o ZFxxx-RZ and ZJxxx-RZ numbers are Diagnostic Documentation Kits. o The Micronotes (uNotes) are single-topic articles, written by various people within Digital to clarify information for other Digital employees. There are two sets of them, with similar numbers. If a uNOTE is cited here, it should be listed as either uNOTE O# to signify the original set of 115, or uNOTE N# to signify the newer set of 44. Some of the older uNotes were recycled and given new numbers. Check out metalab.unc.edu for copies of the new Micronotes, which can be found under: /pub/academic/computer-science/history/pdp-11/hardware/micronotes o For Qbus boards, unless specified as having an S-Box handle or being a MINC module or for a BA200 series enclosure, boards should be able to be used in any Qbus backplane. (In fact, most boards without S-Box handles should still be usable in a BA200 series enclosure) o Please note that some Qbus modules may only be inserted into Q/Q backplanes, some may only be inserted into Q/CD backplanes, and some are jumper selectable for Q/Q or Q/CD. Also, some modules support 16-bit only, some support 18-bit and some support full 22-bit. o The latest version of the file has been modified such that for a given module, all lines containing text pertaining to that module have the module number at the beginning of the line. This is to make it easy to grep (UNIX) for a module number and have all information returned instead of just the first line. M O D U L E L I S T ------------------------------------------------------------------------------ MODULE OPTION BUS DESCRIPTION ------ -------- --- -------------------------------------------------- 000034 MCS11-CK CTI Bus option RAM (256Kbytes) 000034 PN: 50-15487 000034 Refs: EK-PC100-V1 000041 DTC11-A CTI Telephone Management System (TMS) 000041 Refs: EK-PC100-V2, MP-01654, Intel (8031, 8051, 8251A) 000041 Refs: Intel (8255A) 000042 DECNA CTI Ethernet Controller 000042 PN: 50-15986 (50-15987 for DECNA-K, per O/M list) 000042 Refs: EK-PC100-V2, MP-01895, Intel (82586) 000043 PC3XS-AA CTI Z80/CPM option 000043 PN: 50-15640 000043 Refs: EK-PC100-V2 000046 PC3XX-AA CTI Realtime Interface 000046 PN: 50-15538 000046 Refs: EB-25824-18 000051 DRC11-AA CTI Parallel Interface 000052 DLC11-AA CTI Serial Interface 000053 ARC11-AA CTI Analogue Interface 000064 -------- CTI Quad serial line option 000401 -------- CTI 5.25" Winchester disk controller 000401 PN: 54-15134 000401 Refs: EK-PC100-V2 001002 -------- CTI Professional 350 Bus video bit map controller 001002 PN: 50-15137 001002 Refs: EK-PC100-V1 001403 VC241-A CTI Professional 350 extended bitmap (color option) 001403 PN: 50-15145 001403 Refs: EK-PC100-V1 002004 -------- CTI RX50 5.25" floppy diskette controller 002004 PN: 50-15057 002004 Refs: EK-PC100-V2 54-11086 -------- - Power regulator. +15V @ 4A, used in BA11-K A009 AD11-K U Analogue-to-Digital Converter for 11/34 A012 ADV11-A Q 16-channel, 12-bit Analogue-to-Digital Converter A012 Caution: uses BC1 for purposes other than BDAL18 A012 Refs: EK-ADV11-OP, MP-00193, EB-20174-20, uNOTE O#108 A013 MNCAD ? LSI11 BUS IN MINC, 16 Ch 12-bit A/D, QUINT A017 NCV11-A Q Dual 4-input MUX, S&H, 8 bit A/D, Quad A020 -------- Q A/D, 16-Channel, Relay-switched A026 AXV11-C Q 16-channel, 12-bit Analogue-to-Digital plus A026 2-channel, 12-bit Digital-to-Analogue Converter A026 (Also AXV11-D) A026 Refs: EK-AXV11-UG, MP-01291, EK-AXVAB-UG, EK-UDIPD-RC A026 Refs: uNOTE N#044 A026-PA AXV11-S Q 16-channel, 12-bit Analogue-to-Digital plus A026-PA 2-channel, 12-bit Digital-to-Analogue Converter A026-PA Refs: EK-AXV11-UG, MP-01291, EK-AXVAB-UG, EK-UDIPD-RC A029 IAV11-C ? 16 Channel flying cap. ex MUX add-on A029 for IAV11-A A030 ADQ32-A Q 200Khz 32 Channel Analogue-to-Digital A030 Converter with DMA A030 Refs: EK-153AA-UG, EK-UDIPA-RC A030-PA ADQ32-S Q 200Khz 32 Channel Analogue-to-Digital A030-PA Converter with DMA A030-PA (for BA200 series) A030-PA Refs: EK-153AA-UG, EK-UDIPA-RC A1007 AMF01-A Q 48 Channel Addon for ADF01-B (A814-YA) A1008 ADV11-D Q Analogue-to-Digital Converter, with DMA A1008 Refs: EK-AV11D-UG, EK-UDIPD-RC A1008-PA ADV11-S Q Analogue-to-Digital Converter, with DMA A1008-PA Refs: EK-AV11D-UG, EK-UDIPD-RC A1009 AAV11-D Q Digital-to-Analogue Converter, with DMA A1009 Refs: EK-AV11D-UG, EK-UDIPD-RC A1009-SA AAV11-S Q Digital-to-Analogue Converter, with DMA A1009-SA (for BA200 series) A1009-SA Refs: EK-AV11D-UG, EK-UDIPD-RC A154 MNCAM ? 8 Differential or 16 Single Ended Channel A154 MUX, Quint A241 LPSAG-VG U LPS11 4-channel variable gain preamplifier A242 LPSAG U LPS11 4-channel fixed gain preamplifier A246 MNCAG ? 4 Channel Switched Gain Differential Input A246 Preamp, Quint A406 LPSSH U LPS11 Analogue sample-and-hold option A406 LPSAD-12 U LPS11 Analogue sample-and-hold (3 of 4) A407 LPSAD-12 U LPS11 8-channel A/D multiplexor (4 of 4) A410 IAV11-A Q 4/12 Channel Analogue-to-Digital Converter A410-PA IAV1S-AA Q 16 Channel Analogue-to-Digital Converter A410-PA S-Box handle A410-PO IAV1S-A Q 4/12 Channel Analogue-to-Digital Converter A410-PO S-Box handle A410-YA IAV11-AA Q 16 Channel Analogue-to-Digital Converter A411 ASM01-A Q 16 Channel Sample and Hold. A4002 KWV11-C Q Programmable real-time clock A4002 Refs: uNOTE O#108 A6001 AAV11-A Q 4-channel, 12-bit Digital-to-Analogue Converter A6001 Caution: uses BC1 for purposes other than BDAL18 A6001 Refs: EK-ADV11-OP, MP-00186, EB-20175-20, uNOTE O#108 A6002 MNCAA ? MINC LSI-11 Bus, 4 Channel, 12-Bit A6002 Digital-to-Analogue Converter, Quint A6006 AAV11-C Q 4-channel, 12-bit Digital-to-Analogue Converter A6006 Refs: EK-AXV11-UG, MP-01294, ZJ248-RZ, uNOTE O#108 A6007 IAV11-B Q 4 Channel Isolated 20ma Analogue output A6007-PO IAV1S-B Q 4 Channel Isolated Digital-to-Analogue Converter A6007-PO S-Box handle A6009 AAF01-A ? Highspeed Analogue-to-Digital Converter. A625 LPSVC U LPS11 Two 12-bit DACs (2 of 2) A8000 ADV11-C Q 16-channel 12-bit Analogue-to-Digital Converter A8000 with software-controllable gain A8000 Refs: EK-AXV11-UG, MP-01292, ZJ250-RZ, uNOTE O#108 A804 LPSAD-12 U LPS11 12-bit A/D Converter (2 of 4) A814-YA ADF01-B ? Highspeed Analogue-to-Digital Converter. G066 - TU16 9 Channel read amp G102 -------- U Sense inhibit card for 11/15 G109C ???????? ? ????? G114 ???????? U ????? (with G235 and H217C, part of memory option) G231 ???????? ? 16K XY Selection, Current source, Address G231 Latch, 8K Decode. G235 ???????? U 16K XY Drive, Current source, Decode G235 (with G114 and H217C, part of memory option) G651 ???????? U 4-8K 16-18 bit mother board, mates with G651 H221 (with H221-A, part of memory option) G401 MS11-BR U 4-Kword 16-bit MOS RAM (11/45) G401-YA MS11-BR U 4-Kword 18-bit MOS RAM (11/45) G5108 U Writeable programmable logic array tester for F11 G5108 chipset G5115 U H777-TA power supply tester G5148 TU58-AA/BA Q Interface to parallel TU58 G5152 KXT11-A Q Test module, 4-Kbyte RAM, 24-Kbyte PROM, CSR G5167 Q PULSAR (LSI-11 multiprocessor board) G5168 Q PULSAR event transmitter G5169 Q PULSAR event receiver G5173 U 11/60 2355 control G5174 U 11/60 2355 4-line tester G5215 KDF11-TC Q LSI CPU bus isolator extender G5216 Q PULSAR performance monitor G5281 Q 11/23 bus exercisor G5337 Q 11/03 multi LSI option tester G5353 U 11/24 quick verify station controller G5616 Q Qbus extender card G645 U 8-Kword 19-bit stack board (11/05, 11/25, 11/45, G645 PDP-10) G647 U 16-Kword 20-bit stack board (PDP11, PDP10) G651 U 4 to 8-Kword 16 to 18-bit mother board G651 (Mates with H221) G652 U 16-Kword 16 to 18-bit mother board with logic G652 (Mates with H222-A) G652-YA U G652 that mates with H222-YA G653 MMV11-A Q 4-Kword 16-bit mother board with logic G653 (mates with H223). Q16/CD-only option. G653 Refs: EB-18451-20, MP-00094 G657 U 32-Kword SPC core memory electronics with no G657 parity (18-bit) G727 U Grant continuity card with DMA link (NPR), G727 single G727-A U Grant continuity card G7270 U Longer form of G727 G7271 U Short double-jumper card (MF11-L) G7272 Q Grant continuity card G7273 U Bus Grant & Non-processor grant G736 U jumper module G7360 U priority selector, G736 with two sockets H114 U (with G114 and G235, part of memory option) H207 U 4096x16 core stack for 11/15 (on G616 & G617) H211 MM8-EH U 4-Kword 12-bit stack on G648 (for 11/20) H213 U 4-Kword 16-bit stack on G645 H214 U 8-Kword 16-bit H213 (used in MM11-L) H214 (replaced by H215) H214-YA U 8-Kword 16-bit H213 (used in MM11-L) H214-YA (replaced by H215) (same as H214, but 850NS) H215 U 8-Kword 18-bit (parity) H213 (used in MM11-LP, ME15) H216 ? 8K x 19 bit H213, used in MF10 H217 U 16-Kword 16-bit memory stack (with G114 and G235) H217 (replaced by MA20-M) H221-A U 8-Kword 18-bit stack (plugs into G651) H221-B U 8-Kword 16-bit stack (plugs into G651) H222 MM11-DP U 16-Kword 18-bit stack H223 MMV11-A Q 4-Kword 16-bit stack & drive assembly H223 (plugs into G653) H223 Refs: EB-18451-20, MP-00094 H224 U 32-Kword 18-bit core stack H228-B MM11-YP U 32-Kword 18-bit 14-mil core stack H228-B (plugs into G657) H3006 8-Line RS232 Distribution panel H3020 DMF32 Multi-function distribution H315 Test Connector H315 (DH11, DL11E, DL11W, DLV11, DQ11, DU11, DUV11) H317-B Distribution Panel (DH11) H317-E Distribution Panel, EIA (DZ11) H317-F Distribution Panel, 20mA (DZ11) H3173-A Distribution Panel H3190 DZ11 Test connector H325 Line loopback test connector H325 (DMV11, DMP11, DMR11, DPV11, H325 DUP11, DV11, DZ11, DZV11) H3250 Test Connector (DMC11, DMP11, DMR11, DMV11) H3251 Test Connector (DMP11, DMR11, DMV11) H3254 Test Connector (DMP11, DMR11, DMV11) H3255 Test Connector (DMP11, DMR11, DMV11) H3257 Terminator Test Connector (DMP11, DMR11, DMV11) H3258 Terminator Test Connector (DMP11, DMR11, DMV11) H3259 Cable Turnaround test connector (DPV11, DZ32) H3260 Cable Turnaround test connector (DPV11) H327 DZ11 Turnaround connector H3271 Staggered Turnaround Test Connector (DZ11[-x]) H3272 Test Connector (DZ32) H3273 Test Connector (DZ11-X) H3274 Test Connector (DZ11) H3277 Staggered loopback test connector H329 DZV11 Comm Loopback test connector H349 Distribution panel H7004-B 20mA Static Filter H7004-C EIA Static Filter H7104-C Power regulator, +2.5V 85A, used in VAX-11/750 H7104-C Refs: MP-01020 H7104-D Power regulator, +5V 120A, used in VAX-11/750 H7104-D Refs: MP-01021 H7105 Power regulator, +15V, used in VAX-11/750 H744 Power regulator. +5V @ 25A, used in BA11-K H745 Power regulator. -15V @ 10A, used in BA11-K H754 Power regulator. +20V @ 8A, and -5V @ 1.1A, H754 used in BA11-K. H780 Power supply (used in BA11-M) H780 (120vac: -A, -C, -E, -H, -K, -M, -P, H780 240vac: -B, -D, -F, -J, -L, -N, -R) H780 Refs: EK-H780C-OP, EB-07948-53, MP-H780 H781 Power supply (used in BA11-M) H7835 Power supply (used in VT103 terminal) H786 Power supply (used in BA11-N) H7861 Power supply (used in BA11-N) H7862 Power supply (used in Professional 300 series) H7862 Refs: EK-PC100-V1 H7864 Power supply (used in BA23) H8611 Test Connector (DH11) H8612 Test Connector (DV11) H861C Test Connector (DH11, DV11) H9270 DDV11-A Q 4 x 4 Qbus backplane, Q18 (used in BA11-M) H9270-Q Q 4 x 4 Qbus Backplane, Q22 (used in BA11-M) H9273-A Q 4 x 9 Qbus backplane, Q18/CD H9275(-A) Q 4 x 9 Qbus backplane, Q22 (used in BA11-N) H9275(-A) Refs: EK-H927A-CG, uNOTE N#035 H9276(-A) Q 4 x 9 Qbus backplane, Q22/CD (used in BA11-N) H9278(-A) Q 4 x 8 Qbus backplane (used in BA23) H9278(-A) 3 slots (1-3) Q22/CD, 5 slots (4-8) Q22 H9281-BA Q 2 x 4 Qbus backplane, Q18 (used in BA11-VA) H9281-BB Q 2 x 8 Qbus backplane H9281-C Q 2 x 12 Qbus Backplane H9281-QA Q 2 x 4 Qbus backplane, Q22, dual height H9281-QB Q 2 x 8 Qbus backplane, Q22, dual height H9281-QC Q 2 x 12 Qbus backplane, Q22, dual height L2001 KA60 M 80NS CMOS SMP Dual CPU w/64kb snoopy cache L2002 VS600 M M-Bus to Q-Bus adapter module L2003 VS600 M I/O Controller module for DSSI/SCSI, Ethernet, L2003 printer, modem, keyboard, mouse/tablet L2004 VS600 M LEGSS Graphics Base module w/accelerator L2005-AA VS600 M LEGSS 8-plane output module L2006-AA VS600 M LEGSS 16-plane memory upgrade L2007-A MS60 M 8Mb memory array with 1Mb chips L2007-B MS60 M 16Mb memory array with 1Mb chips L2007-C MS60 M 32Mb memory array with 1Mb chips L2008 VS600 M TQK70 Tape adapter module L2010-AA KA60 M 60NS CMOS SMP Dual CPU w/64kb snoopy cache, L2010-AA 1Mbit video ram, FBIC interface chip to M-Bus, L2010-AA VDAC CLR Graphics chip L4002-AA KA675 - vax 4000/600 CPU card L4002-BA KA675 - vax 4000/500 CPU card L4002-CA KA675 - vax 4000/400 CPU card L4004-BA MS690-BA - 32 MByte DRAM for VAX 4000 /400 /500 /600 L4004-CA MS690-CA - 64 MByte DRAM for VAX 4000 /400 /500 /600 L4004-DA MS690-DA - 128 MByte DRAM for VAX 4000 /400 /500 /600 M105 U Device selector for PDP-11 M105 (Also called Address selector module) M109 U PDP-11 device selector with jumpers, bits 13-17 M1091 U Memory device selector, with jumpers, bits 11-17 M1500 U Bidirectional bus interfacing gates [pdp8/pdp11] M1501 U Bus input interface (16 drivers) M1502 U 16-bit bus output interface M1621 U Digital voltmeter data input interface for M1621 Fluke 8200A/8400A, H-P 3450A/3480A, Data M1621 Precision 2000, Systron-Donner 7110, Dana 4800 M1621 M105 or eqvt is required. May use M7820 M1623 U Instrument remote control interface. M1623 Supports DVMs as M1621 + programmable PSUs: M1623 Fluke 4210A/4216A/4250A/4265A, M1623 H-P 6129B/6130B/6131B M1623 M105 or eqvt is required. May use M7820 M167 U Compares two 8-bit words ( <, =, > ) M1801 U 16-bit reed relay output interface M2009 CE11 U Set point register M2010 CE11 U 2 Channel impulse counter M224 KA11 U 11/20 8-bits with data paths module, 2 latches, M224 adder. M225 KA11 U 11/20 registers module (processor memory) M225 16 bits x 16 bits M234 KE11-A U 3 8-bit registers, adder & L/R shift M239 U 3 4-bit counters (8291s) or 74197, parallel load M244 U 6 Ckts, Each 3 input Mux with latch, non-inverting M2500 U 2 64-word 4-bit MOS FIFO memories (needs -12V) M2500-YA U M2500 with filter cap on line U1 M2501 DMA01-A U Dual 8*4 bit RAM (4 74170's) M2501-YA U M2501 with 1.2K resistive pullups on RAM outputs M2503 ADC01 U Dual 256 bit Schottky RAM (3106's) M2504 U Dual 256*4 RAM, common address, separate data I/O M259 KT11 U Associative memory, 2x8, shift register M259 capability M3100 DECSA U EIA sync line unit for DECSA M3101 DECSA U V.35 sync line unit for DECSA M3102 DECSA U 2-line async line unit for DECSA M3102 (DEC/DLC/DRCSA) M3103 DECSA U LP line unit for DECSA M3104 DHV11-A Q 8-line Asynchronous Multiplexor, with DMA M3104 Refs: EK-DHV11-TM, EK-DHV11-MC, MP-01783, ZJ362-RZ M3104 Refs: uNOTE N#041 M3105 DHU11-A U 16-line async DMA MUX M3105 Refs: EK-DHU11-UG M3106 DZQ11-M Q 4-line double-buffered async MUX, EIA 50-10KB, M3106 with modem control; replaces M7957 (dual height) M3106 Refs: EK-DZQ11-UG, EK-DZQ11-MC, EK-DZQ11-TM, MP-01795 M3106 Refs: ZJ251-RZ M3106-PA DZQ11-SA Q 4-line double-buffered async MUX with S-box handle M3106-PA Refs: EK-DZQ11-UG, EK-DZQ11-MC, EK-DZQ11-TM, MP-01795 M3106-PA Refs: ZJ251-RZ M3107 DHQ11-M Q 8-line async MUX module, DMA, Q22 M3107 Refs: EK-DHQ11-TM, EK-DHQ11-UG M3108 DSV11-A Q 2-line sync SLU for BA23/123 (-AA is first unit, M3108 -AB is second add-on unit). M3108 Refs: EK-DSV11-TD, EK-DSV1M-IN, EK-DSV1M-UG, EK-DSV11-IN M3108 Refs: EK-DSV11-UG M3108-PA DSV11-S Q 2-line sync SLU for BA223 (-SF is first unit, M3108-PA -SG is second add-on unit). M3108-PA Refs: EK-DSV11-TD, EK-DSV1M-IN, EK-DSV1M-UG, EK-DSV11-IN M3108-PA Refs: EK-DSV11-UG M3110 DRCSA U Protocol assist #1 w/special character check M3110 and CRC (DEC/DLC/DRCSA) M3111 DRCSA U Protocol assist #2 w/special character check M3111 and CRC (DEC/DLC/DRCSA) M3112 DRCSA U Console boot terminator (DEC/DLC/DRCSA) M3117 DHZ11 Q 16-line Asynchronous Multiplexor M3118-YA CXA16-A Q 16-line Asynchronous Multiplexor w/DEC423 output M3118-YA (for BA200 series only) M3118-YA Refs: EK-CAB16-TM, EK-CAB16-UG M3118-YB CXB16-A Q 16-line Asynchronous Multiplexor w/DEC423 output M3118-YB (for BA200 series only) M3118-YB Refs: EK-CAB16-TM, EK-CAB16-UG M3119-YA CXY08-A Q 8-Line Asynchronous Multiplexor w/DEC423 output M3119-YA (for BA200 series only) M3119-YA Refs: EK-CXY08-TM M3121-PA DFA01-AA Q Dual integral modem with S-box handle, M3121-PA DF224 compatible, US/CAN M3121-PA Refs: EK-CAB16-TM, EK-DFA01-IN M3123 DHF11 Q 32-line Async MUX, Fiber optic I/O for BA223 M3123-YA DHF11 Q 32-line Async MUX, Fiber optic I/O M3124 CXA08-M Q 8 line async MUX w/nmc, ITEG handle, M3124 w/DEC423 Out M3125 Q BITBUS to Qbus interface M3125-PA Q Qbus interface to Intel BITBUS, Q22, RS485, M3125-PA with S-box handle M3125-YA Q Qbus interface to Intel BITBUS, Q22, no handle M3126 DFA01-BA Q Dual integral modem with S-box handle, UK version M3127-PA DESQA-SA/SF Q Ethernet/thinwire adapter (DELQA+DESTA) M3127-PA with S-box handle M3127-PB DESQA-SA/SF Q M3127-PA with handle access thinwire pushbutton M3127-PB switch. M3128 QBIC Q Qbus interface to VMI CCIC M3129 KMV11 Q NRZI/RS422 data Converter for KMV11 M3129 (renamed KMV1A) M3130-GA IGQ11 Q 2 Port GE-Genius bus to Q-bus for GE-FANUC M3130-GB IGQ11 Q 1 Port GE-Genius bus to Q-bus for GE-FANUC M3130-PA IGQ11 Q Q22-bus interface to GE-Genius bus M3130-PA with S-box handle M3130-SA IGQ11 Q 2-Port GE-Genius bus to Q-bus M3130-SB IGQ11 Q 1-Port GE-Genius bus to Q-bus M3130-YA IGQ11 Q GE-Genius bus to Q-bus interface, standard handle M3133 DRQ3B Q RS-422 Signal conditioning module for DRQ3B M3134-PA DS500 Q IBM Terminal server, 4 port (DECServer 500) M3135-01 Q Multi-line DECVoice, Q-bus for multiple channels, M3135-01 50 MHz clock M3135-02 Q Multi-line DECVoice, Q-bus for multiple channels, M3135-02 60 MHz clock M3136 Q Q-bus module connects M3135 to T1 telephone service M3137-AA DEVIS Q +12V power module for DEVIS (VAXCAMERA) M3138-AA KRQ01-AA Q Data cipher module for Qbus M4000 CE11, CEV11 ? 16-bit programmable clock M4001 DMS11-F ? Clock M4002 KWV11-C Q Programmable Real-Time Clock M4002 Refs: EK-AXV11-UG, MP-01293, EK-AXVAB-UG, EK-UDIPD-RC M4002 Refs: EK-KWV1C-CG, ZJ247-RZ, uNOTE N#044 M4002-PA KWV11-S Q Programmable Real-Time Clock M4002-PA Refs: EK-AXV11-UG, MP-01293, EK-AXVAB-UG, EK-UDIPD-RC M4002-PA Refs: ZJ247-RZ, uNOTE N#044 M4003-AA Q Realtime clock for Qbus 32-bit counter, 10MHz M4003-PA Q Realtime clock for Qbus 32-bit counter, 10MHz M4003-PA with S-box handle M454 DC11-A U Crystal clock with simultaneous outputs of 28.8, M454 19.2, 9.6, 4.8, 2.4, 1.760 KHz M454 (for DC11-A, DP11-A) M4540 DC11, DH11 U M454 with more frequencies available M5001 CIS11-B ? 8 channel optically isolated inputs M5001-YA ? M5001 with 24V voltage sense inputs M5001-YB ? M5001 with 24V contact sense inputs M5001-YC ? M5001 with customized inputs M5010 D 32-bit non-isolated dc input module (IP11) M5010 I/O Daisy chain bus, 32-bit 55V (6V threshold) M5010 Non-isolated DC sense M5011 D 16-bit non-isolated dc input module (IP11) M5011 I/O Daisy chain bus, 16-bit, 55V (6V threshold) M5011 Non-isolated change of state interrupt M5012 D 16-bit isolated dc input module (IP11) M5012 I/O daisy chain bus, 16-bit, 55V (6V threshold) M5012 Isolated DC sense M5012-YA D M5012 with TTL compatible inputs (IP11) M5013 D 8-bit isolated ac input module (IP11) M5013 I/O daisy chain bus, 8-bit, 120VAC M5013 (46-75V threshold) isolated AC sense, one M5013 bit interrupts M5014 D Dual input counter, 16-bit (IP11) M5014 I/O daisy chain bus, dual 16-bit input counter M5015-YM CSC11 D M5015-YF with flags inhibited M5016 D Quad input counter/prescalar, 8-bit (IP11) M5016 I/O daisy chain bus, quad 8-bit counter/prescaler M5017 CE11,CEV11 ? Signal receiver (5V contact sense) M5017-YC CE11,CEV11 ? Signal receiver (12V opto input) M5019 CE11,CEV11 ? Input function module (SSMU) M5020-YA CSC11 ? 32 bit OCI with 600V isolation and filter M5020-YA 3ms, 5V input M5020-YB CSC11 ? 32 bit OCI with 600V isolation and filter M5020-YB 3ms, 12V input M5020-YC CSC11 ? 32 bit OCI with 600V isolation and filter M5020-YC 3ms, 48V input M5020-YD CSC11 ? 32 bit OCI with 600V isolation and filter M5020-YD 3ms, 129V input M5020-YF CSC11 ? 36 bit OCI with 600V isolation and filter M5020-YF 3ms, 5V input M5020-YG CSC11 ? 36 bit OCI with 600V isolation and filter M5020-YG 3ms, 12V input M5020-YH CSC11 ? 36 bit OCI with 600V isolation and filter M5020-YH 3ms, 48V input M5020-YJ CSC11 ? 36 bit OCI with 600V isolation and filter M5020-YJ 3ms, 129V input M5020-YN CSC11 ? 32 bit OCI input 15VDC, 2ms delay, common V M5020-YP CSR11 ? 32 bit OCI input, 5VDC, 4.5ms delay M5020-YR CSC11 ? M5020-YE with slow flag response M5026 IDV1S-A Q 16-bit opto-isolated input module M5026-PO IDV1S-A Q 16-bit opto-isolated input module M5026-PO with S-box handle M5027 KMS11 ? 8 channel RS232 to RS422 converter M5028 DRU11-C U Optocoupler conditioning module for DRU11-C M5031 D 16-channel isolated dc interrupt module, 16-bit M5031 (IP11) M586 DF11-BA U Integral modem, 103 standard M587 DF11-BB U Async internal modem, answer-only, Bell CBS or CDT M5900 DJ11 U 16-channel TTL receiver M5901 DJ11 U 16-channel EIA transmitter M5902 DJ11 U 16-channel full duplex TTY transceiver M5903 RH11 U MASSBUS terminal transceiver M5904 RH11 U MASSBUS control transceiver M5906 DJ11-AD/AE U 16-channel EIA-TTL, TTL-EIA, priority sockets, M5906 DH11-AD/AE 2 H854. M5906-YA DJ11-AD/AE U M5906 modified to accept X1 baud clock rate M591 U 5 Channel EIA to DEC, 4 Channel DEC to EIA M5912-YA DFS11-MA U Private wire integral modem, 1 Megabaud, DF11 pins M5912-YB DFS11-MB U 500 Kbaud M5912-YA M5912-YC DFS11-MC U 240 Kbaud M5912-YA M5912-YD DFS11-MD U 56 Kbaud M5912-YA M5912-YE DFS11-ME U 100 Kbaud M5912-YA M5915 MNCDI U Digital input to MINC, 16 lines, Quint height M5916 U 24 Differential transmitters and 24 Differential M5916 Receivers, Quad M5916-YA DR11-L,-M U Differential adapter M5916-YB DMA01-A U Differential adapter M5917 CRS11-LL U Differential drive for card readers, 17 in, 1 out M5922 U RM03 transceiver port A M5923 U RM03 transceiver port B M5924 DF11-L U Fiber optic link M5925 LPC01-V U 6 differential receivers, 10 differential drivers M5926 DSZ11-B U Add-on for TTL 20mA loop conversion M5927 DAV11 U TTL to differential transceiver (Like M5927 M7230 except all signals from 3 H854) M5927-YA DR11-C U DR11-C Compatible Differential line driver M5928 DMS11-F U DMS11-F, Modem level Converter, TTL/RS423 M5929 MTS02-BD U Multidrop interface M5931 DM11-XM U EIA to/from MIL188C/100/114 M5932 DM11-XF U EIA to/from fiber optic cable M5935 DF11-WA U 10 5V 70mA outputs, 2 inputs M594 DF11-A U 8 channel EIA-CCITT to DEC, 7 DEC to EIA-CCITT M594 3V hysteresis M594-YB DF11-A U M594 with 3V hysteresis M5941 DFS11-H U 8 channel MIL188C to DEC interface for DFS11-H M5941-YA DFS11-HA U 8 channel MIL188C to DEC Interface for M5941-YA data lines only M5941-YB DFS11-HB U 75 Baud 8 Ch MIL188C to DEC Interface M5941-YC DFS11-HC U 110 Baud 8 Ch MIL188C to DEC Interface M5941-YD DFS11-HD U 150 Baud 8 Ch MIL188C to DEC Interface M5941-YE DFS11-HE U 300 Baud 8 Ch MIL188C to DEC Interface M5941-YF DFS11-HF U 600 Baud 8 Ch MIL188C to DEC Interface M5941-YH DFS11-HH U 1200 Baud 8 Ch MIL188C to DEC Interface M5941-YJ DFS11-HJ U 2400 Baud 8 Ch MIL188C to DEC Interface M5941-YK DFS11-HK U 3600 Baud 8 Ch MIL188C to DEC Interface M5941-YL DFS11-HL U 4800 Baud 8 Ch MIL188C to DEC Interface M5941-YM DFS11-HM U 9600 Baud 8 Ch MIL188C to DEC Interface M5941-YN DFS11-HN U 50K Baud 8 Ch MIL188C to DEC Interface M5942 DF11-L U 8 channel EIA-CCITT to DEC, 7 DEC to EIA-CCITT, M5942 300,600,1200,1800 baud crystal clock M5943 DM11-DR U 5 channel EIA-CCITT to TTL M5943 4 channel TTL to Tri-state M5943-YA DM11-DS U M5943 modified to permit other drivers and M5943-YA receivers on same lines M5946 DFS11-A U 8 channel differential drive and receiver, M5946 40mA, 0 to +5V, receiver +15 to -15V. M5947 DR11-BD U M919 with differential drive and receive M5947 with 3 H855 M5948 CSC11 U Interface and serial Y-bus connector M5949 DMC11-DA U EIA to MIL188-114 Converter M5949 7 receivers, 4 drivers M595 DF11 U Current mode Converter for 301 and 303 modem M5951 Q 100 Mbit transceiver, single line, used in Hydra M5952 DFS11-BA U 5 channel TTL to RS422, 8 channel RS422 to TTL M5952-YA DFS11-BB U 5 channel TTL to MIL 188-114, M5952-YA 8 channel MIL 188-144 to TTL M5952-YB DFS11-?? U 5 channel EIA RS232C to RS422, M5952-YB 8 channel RS422 to RS232C M5952-YC DFS11-?? U 5 channel EIA RS232C to MIL 188-114, M5952-YC 8 channel MIL188-114 to RS232C M5953 DV11/DZ11 U 16 EIA to TTL, 24 TTL to EIA, conn for DV11, DZ11 M596 DF11 U 20mA to DEC, DEC to 20mA, 4 channel each, M596 replaced by M5960 M5960 DF11 U Replaces M596 M597 DX11 U 6 channel IBM receiver + bus M5970 PC500 U PC500 TCY Control Module M5971 DZQ11/DHQ11 Q 4 channel EIA to 20mA Converter M5973 LLD11 U TTL to differential transceiver M5974 LN01K-AA U TTL to differential transceiver M5974 (9 transmit, 2 receive) M5975 Q DECServer 500 support for IBM3270 class terminals M5976-AA KZQSA Q Qbus to SCSI adapter M5976-SA KZQSA-SA Q Qbus to SCSI adapter (for BA200/400 enclosures) M5976-SA with S-box handle M5977-AA RQZX1 Q Qbus to SCSI disk (MSCP) and tape (TMSCP) adapter M598 DF11-K U 1 Channel optical coupled 20ma to DEC send/recv M5980 U 10-channel TTL differential transeiver M5982 DWQVA Q 2 channel fiber optic interface (IFQ), Qbus to M5982 Stealth bus M599 U 4 channel Xmit and Rec Western Union High Level M599 (+/- 6V 10mA) Telex M6003 MNCDO Q 16 Channel Digital output, MINC, Quint M6010 D 32-bit non-isolated dc output module (IP11) M6010-YA D 32-bit non-isolated dc output module (TTL, IP11) M6011 D Non-isolated dc one-shot output module (IP11) M6012 D 8-bit optical isolated dc output module (IP11) M6013 D 8-bit isolated ac output module (IP11) M6014 D Dual 16-bit output Converter (IP11) M6015 D 16-bit retentive dc output module (IP11) M6029 IDV11-B ? 16-bit Opto Isol. outputs M688 U UNIBUS power fail driver module M7013 ???????? ? Vector Generator and Character Generator M7013 Control, VT40 M7014 ???????? U Unibus Controller and Bootstrap for VT40 M7014-YA ???????? U M7014 w/No Bus Terminators M7015 LPS11-S U LPS11 UNIBUS control M7016 LPSKW U LPS11 Programmable realtime clock & 2 Schmitt M7016 triggers. M7017 LPSDR U LPS11 16-bit buffered digital I/O M7018 LPSAD-12 U LPS11 A/D control (1 of 4) M7019 LPSVC U LPS11 Scope control (1 of 2) M7020 LPS11-NP U LPS11 DMA option M7025 KW11-K U Dual programmable clock M7028 DMS11-F U DMS11-F, KMC11-A Line Unit Interface M7028-YA DMS11-F U DMS11-F, KMC11-A Line Unit Interface + Terminator M7029 DMS11-F U Line unit interface W HDLC protocol M7030 CTS11-J U Control for CTS11-J M7031 CTS11-J U Drivers, receivers, code Converter for CTS11-JA M7032 CTS11-J U Drivers, receivers, code Converter for CTS11-JB M7033 U Scanner module for use with Hickok card equipment M7034 U 80 Column driver for use with Hickok card equipment M7035 U 22 Column driver for use with Hickok card equipment M7036 U Diode Module assembly for use with Hickok card M7036 equipment M7037 U Reader-Control module for true data card/bade reader M7039-BC MS220-A Q KN220 64 MB mem, Fujitsu DRAMS M7039-CC MS220-A Q KN220 128 MB mem, Fujitsu DRAMs M7051 U VT48 data registers & multiplexors M7052 U VT48 dual 12x12 multiplier with successive M7052 approximation. M7053 U VT48 scissoring & tangent control M7054 U VT48 stack & silo control M7055 U VT48 display status MUX M7056 U VT48 stack & silo M7057 U VT48 display status register M7058 U VT48 display control M7059 U VT48 bus control M7060 U VT48 push button control (SPC) M7061 VSV11-F Q Raster graphics sync generator & cursor control M7061 (also VSV11-H, -J, -K) M7061 Refs: EK-VSVFQ-UG, MP-01012, EK-VT101-TM, YM-C193C-00 M7062 VSV11-MA Q Raster graphics image memory M7062 Refs: EK-VSVFQ-UG, MP-01012, EK-VT101-TM, YM-C193C-00 M7064 VSV11 Q Raster graphics image processor M7064 (18-bit DMA only) M7064 Refs: EK-VSVFQ-UG, MP-01012, EK-VT101-TM, YM-C193C-00 M7065 U Synch line receiver, 6, 7 or 8 bits M7066 VTV01 U Video Display Sys: UNIBUS to Qbus Converter M7067 VMV21 U Video Display Sys: sync generator & character M7067 generator (64-char, 25 lines). M7068 VMV31 U Video Display Sys: bit map, 128 x 128 x 4 M7069 VMV22 U Video Display Sys: microprocessor & memory M7070 VMV22 U Video Display Sys: character & sync generator M7071 U Video Display Sys: image memory, RAMs & buffer M7071 logic. M7075 U Sync line transmitter; 6-, 7- or 8-bits M7078 U 4 pulse synchronizers (74120) M7079 U 16 Channel badge reader M7081 LA120 - LA120 control, hex with no fingers, 7-wire M7081 printhead version M7081-YB LAS12 - M7081 with ROMs for LAS12, LA124 M7081-YD LA120-RB - M7081 with increased head drive current for thick M7081-YD forms M7082 DMA01 U Single DMA Mux channel M7083 DMA01 U 8-level priority arbiter M7084 DB11-H U DB11-H Control M7086 PTV11-E Controller for FACIT 4070 M7088 CE11 U CE11, CEV11 interrupt register M7089 U Quad transceiver M7090 KD11-Z U 11/44 console interface module M7090 Refs: EK-KD11Z-TM M7091 KE44-A U 11/44 CIS control store module M7091 Refs: EK-KE44A-YM M7092 KE44-A U 11/44 CIS data path/logic module M7093 FP11-F U 11/44 floating point module M7094 KD11-Z U 11/44 data path module M7095 KD11-Z U 11/44 control module M7096 KD11-Z U 11/44 multifunction module M7097 KK11-B U 11/44 4-Kword cache module M7098 KD11-Z U 11/44 UNIBUS interface M7114 VT30-H U RBG graphics UNIBUS interface board M7114 (TV sync generator, memory, control & output) M7130 DTQNA Q Token-bus (IEEE 802.4) to Qbus Network Adapter M7130 Controller module M7131 DTQNA Q Token-bus to Qbus Network Adapter Modem module, used with M7130 M7132 DTC04 Q DECVoice main processor board (dual height) M7133 KDF11-UA U 11/24 CPU board, line clock & 2 SLUs M7133 (Revision D or earlier) M7133-YA KDF11-UA U 11/24 CPU board, line clock & 2 SLUs M7133-YA (Revision E or later) M7134 KT-24 U 11/24 UNIBUS map (extended address to 22 bits) M7135 KD32-AA Q MicroVAX I datapath with G floating point M7135 Refs: EK-KD32-OM, EK-KD32A-OM-CN1, uNOTE N#021 M7135-YA KD32-AB Q MicroVAX I datapath with D floating point M7135-YA Refs: EK-KD32-OM, EK-KD32A-OM-CN1, uNOTE N#021 M7136 KD32-AA/AB Q MicroVAX I memory control M7136 Refs: EK-KD32-OM, EK-KD32A-OM-CN1, uNOTE N#021 M7138 LNV21 Q Q-bus to laser printer DMA interface module M7139-AA VS200 Q Microvax II CPU, Q-bus interface, console, M7139-AA Network controller, @MB memory, option connector, M7139-AA private memory bus controller M7139-AC VS200 Q M7139 with Fuji 256K parts M7139-AF VS200 Q M7139 with Hitachi 256K parts M7139-AH VS200 Q M7139 with NEC 256K parts M7142 VK170-CA Q Serial video module, CRT control logic, M7142 ASCII in/video out M7142 Refs: EK-M7142-UG, MP-00775 M7145 R80 - R80 servo control and position detector, hex board M7147 DV11 U M7808 (M7247+M7246) with synchronized scanner M7148 CE11-D U CE11-D Unibus interface M7149 CE11-D U CE11-D Port control M7150 CE11-D U MIOS Bus usage arbitration M7151 CE11-D U MIOS bus monitor M7152 CE11-D U Maintenance and processor fail alarm M7153 CE11-D U Mulitplexed input function module M7154 CE11-D U Multiplexed input channel selector M7157 DRJ11-A U Line interface, EIA receiver, sync logic, buffer M7157 logic M7158 DRJ11-A U Unibus interface, NPR, bus MUX and transceiver M7160 HSC50 U HSC50 SERDES emulator M7161 UDA50 U UNIBUS SDI disk adapter PR board, no ROMs (1 of 2) M7161 Refs: EK-UDA50-UG M7161-YA UDA50 U M7161 with blasted ROMs M7161-YA Refs: EK-UDA50-UG M7162 UDA50 U UNIBUS SDI disk adapter SI board (2 of 2) M7162 Refs: EK-UDA50-UG M7164 KDA50-Q Q Qbus SDI disk adapter, Q22 (1 of 2) (QDA SDI) M7164 Refs: EK-KDA5Q-UG, uNOTE N#041 M7165 KDA50-Q Q Qbus SDI disk adapter, Q22 (2 of 2) (QDA SDI) M7165 Refs: EK-KDA5Q-UG, uNOTE N#041 M7166 ? Expands BI bus to UNIBUS (KA820) M7168 VCB02, QDSS Q 4-plane colour bitmap module M7169 VCB02, QDSS Q 4-plane video controller module M7177 DN01-AA Q Aut call unit, cable sockets to DLV11, phone line M7179 MPM11 U Mem port control for MPM11 M718 U Bus interface for PDP-11 M7181 CMV11-AA Q CMR Host controller for Qbus to Qbus interface M7182 CMV11-AA Q CMR Host controller for Q-bus micro control and M7182 4 serial ports M7183 CMR01-AA U Micro control for expanded CMR01-AA M7184 CMR01-AA U R-bus control for expanded CMR01-AA M7185 CMR01-AA U 24kbyte EPROM for expanded CMR01-AA M7186 CMR01-AA U 8Kbyte static RAM for expanded CMR01-AA M7190 DZS11-EA U 8-line statistical comm mux M7193 DRQ11-CA Q DMA interface, 16-bit M7194 DR11 U Differential signal conditioning module M7195-FA MXV11-BF Q 128-Kbyte RAM, 2 async EIA SLU, I/O, clock, M7195-FA 2 28-pin ROM sockets M7195-FA Refs: EK-MXV1B-UG, EK-MXVB2-UG, uNOTEs N#003, N#015 M7195-FA Refs: N#019 (O#106), N#020, N#033 M7196 TSV05 Q TSV05 controller for Q/Q22 bus M7196 Refs: EK-TSV05-TM, MP-01167, EB-18451-20, EB-17723-20 M7196 Refs: uNOTE N#041 M7197 IDV11-D Q 5-channel 16-bit counter module M7198 IDV11-D Q 5 channel counter module with S-box handle M7206 TSV05 Q TSV05 Q-bus controller M7206-PA TSV05 Q TSV05 Q-bus controller, for BA2xx boxes M7207 Q Co-processor for image compression & expansion M7207 implemented by using CCITT standard T.3, T.4 M7208 CMCTS Q CMCTS (Cluster memory controller, SDI controller) M7209 CMCTL Q CMCTL (For S-box) Cluster memory controller, SDI M7209 controller) M721 KA11 U Bus interface 1, 8-bits gated in and out M7210 KE11-A U Data control M7212 DB11 U Address line bus repeater control for DB11 M7213 DB11 U Bus repeater control, for DB11 M7213-YA DB11 U M7213 with special modifications, 2 jumpers, 2 cuts M7216-YA KH11-A U M7216 for KH11-A M7217 KP11-A U Power fail and restart M7218 KP11-A U Bus requests M7219 RC11 U Bus interface M7220 RC11 U Clock control M7221 RC11 U Disk interface M7222 RC11 U Status control M7224 RC11 U Unit and track selector M7225 RC11 U Status control extender M7226 DN11 U DN11 Control M7227-YA XY11-A U XY11-A plotter control, 300-400 steps/sec M7227-YB XY11-B U XY11-B plotter control, 500-600 steps/sec M7227-YC XY11-C,E U XY11-C,E plotter control, 800-1300 steps/sec M7227-YD XY11-D U XY11-D plotter control, 1600-1800 steps/sec M7228 KW11-P U Real time programmable clock M7229 DA11-B U DR11-B interface for DA11-B M7230 DA11-BJ U Differential cable driver and receiver M7231 KD11-A U 11/40 data paths module M7232 KD11-A U 11/40 micro word module M7233 KD11-A U 11/40 IR decode module M7234 KD11-A U 11/40 timing module M7235 KD11-A U 11/40 processor status module M7236 KT11-D U 11/40 memory management module M7237 U 11/40 stack limit register M7238 KE11-E U 11/40 EIS board M7239 KE11-F U 11/40 FIS control M724 KA11 U 11/20 bus and console control module M7240 DM11 U DM11-A control M7241 DM11 U DM11-B control, quad M7242 DM11 U DM11-C control M7243 DM11 U DM11 transmitter D M7244 DM11 U DM11 transmitter E M7245 DM11 U DM11 receiver, quad M7246 DM11-BB U Modem control scan, 16 lines, DM11-BB M7247 DM11-BB U 8 Line Mux with modem control M7248 U Unibus repeater BBSY M7249 CD11 U Hollerith Check (Multiple ones error detector) M725 KA11 U 11/20 bus interface and IR module M7251 KG11-A U Network interface XOR and CRC block check option M7253 U 11 to Lear Siegler 7700 terminal M7254 RK11-D U RK05 status control module M7255 RK11-D U RK05 disk control module M7255-YA U Modified M7255 for Diablo series 30 disk drives M7256 RK11-D U RK05 registers module (data path) M7257 RK11-D U RK05 bus control module M7258 LP11 U Printer controller (Dataproducts interface) M7259 MF11-LP U Parity for MF11-LP M726 KA11 U 11/20 IR decode module M726-YA KH11-A U M726 for KH11-A M7260 KD11-B U 11/05 data paths module M7261 KD11-B U 11/05 control logic module M7263 KD11-D U 11/04 processor module M7264 KD11-F Q 11/03 processor with 4-Kword MOS RAM M7264 Caution: uses DC1, DB1, DE1, DF1 for purposes M7264 other than BDAL18-21 M7264 Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357 M7264 Refs: MP-00589, EK-LSI11-MC M7264-AA KD11-F Q 11/03 processor with 4-Kword MOS RAM M7264-AA Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357 M7264-AA Refs: MP-00589, EK-LSI11-MC M7264-AB KD11-F Q 11/03 processor with 4-Kword MOS RAM M7264-AB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357 M7264-AB Refs: MP-00589, EK-LSI11-MC M7264-BB KD11-F Q 11/03 processor with 4-Kword MOS RAM M7264-BB with DIBOL microm M7264-BB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357 M7264-BB Refs: MP-00589, EK-LSI11-MC M7264-CB KD11-F Q 11/03 processor with 4-Kword MOS RAM M7264-CB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357 M7264-CB Refs: MP-00589, EK-LSI11-MC M7264-DB KD11-F Q 11/03 processor with 4-Kword MOS RAM M7264-DB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357 M7264-DB Refs: MP-00589, EK-LSI11-MC M7264-EB KD11-F Q 11/03 processor with 4-Kword MOS RAM M7264-EB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357 M7264-EB Refs: MP-00589, EK-LSI11-MC M7264-FB KD11-F Q 11/03 processor with 4-Kword MOS RAM M7264-FB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357 M7264-FB Refs: MP-00589, EK-LSI11-MC M7264-HB KD11-F Q 11/03 processor with 4-Kword MOS RAM M7264-HB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357 M7264-HB Refs: MP-00589, EK-LSI11-MC M7264-JB KD11-F Q 11/03 processor with 4-Kword MOS RAM M7264-JB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357 M7264-JB Refs: MP-00589, EK-LSI11-MC M7264-YA KD11-H Q 11/03 processor with 0-Kword RAM M7264-YA (To be replaced by M7264-YC) M7264-YA Caution: uses DC1, DB1, DE1, DF1 for purposes M7264-YA other than BDAL18-21 M7264-YA Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357 M7264-YA Refs: MP-00589, EK-LSI11-MC M7264-YB KD11-Q Q 11/03 processor with 0-Kword RAM & DIBOL microm M7264-YB Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357 M7264-YB Refs: MP-00589, EK-LSI11-MC M7264-YC KD11-H Q 11/03 processor with 0-Kword RAM M7264-YC (Revision F or later) M7264-YC Refs: EB-18451-20, MP-00049, MP-00050, MP-00264, MP-00357 M7264-YC Refs: MP-00589, EK-LSI11-MC M7265 KD11-E U 11/34 data paths module (replaced by M8265) M7266 KD11-E U 11/34 control module (replaced by M8266) M7268 RKV11 Q RK11-D to Qbus adapter M7268 Refs: EK-RKV11-OP, EK-RKV11-TM, MP-00223, EB-20175-20 M7269 RKV11-D Q RK05 controller (16-bit DMA only) M7269 Refs: EK-RKV11-OP, EK-RKV11-TM, MP-00223, EB-20175-20 M727 KA11 U 11/20 State control module M727-YA KH11-A U M727 for KH11-A M7270 KD11-HA Q LSI-11/2 CPU, 16-bit M7270 Caution: uses BC1, BD1, BE1, BF1 for purposes M7270 other than BDAL18-21 M7270 Refs: MP-00563 M7275 U BRPE 11 punch interface M7276 U Trend reader interface M7277 DH11 U DH11 Transmit scanner and NPR M7278 DH11 U DH11 Registers and byte count M7279 DH11 U DH11 FIFO buffer M728 KA11 U 11/20 Timing and states module M728-YA KH11-A U M728 for KH11-A M7280 U 8 UARTS on quad-height board M7281 CB11-DA U Unibus to 32 point relay distributor module M7282 CB11-SB U Unibus to 64 point input scan M7283 DA11-F U Window data path board M7284 DA11-F U Window control M7285 DJ11 U MUX control board M7285-YA DJ11 U M7285 W baud rate of 50 M7285-YB DJ11 U M7285 W baud rate of 100 M7286 FK11 U FK11 Interface, VT20 M7288 DH11 U Line parameters control M7289 DH11 U Receiver scanner M7291 CB11-HA U 16 point input interrupt M7292 U TU60 interface M7293 MM11-U/UP U Timing and control M7294 RH11 U MASSBUS data buffer and control M7294-YA RH11-C U Modified M7294 for RH11-C M7295 RH11-A U MASSBUS bus control M7295-YA RH11-B U Modified M7295 with independent NED timeout for M7295-YA RH11-B M7296 RH11 U MASSBUS control and status registers M7297 RH11 U MASSBUS parity control M7298 U 11/40 watchdog timer with restart and crystal clock M7349 ML11 U ML11 indicator board, status LEDs + on/off switch M7350 RT02 - RT02-C, -D, -E badge reader M7351 TM04-AA U Massbus control M7352 TM04-AA U Tape control for STC 1935 formatter and 1921 drive M7355 U 4 Megabit bubble array, Intel 7110 M7357-AB ML11-A U 256 Kb array, mostly good Mostek 16K chips M7357-AC ML11-A U 256 Kb array, mostly good National 16K chips M7357-AE ML11-A U 256 Kb array, mostly good TI 16K chips M7358-AE ML11-B U 1 Mb array, mostly good TI 64K chips M7358-AF ML11-B U 1 Mb array, mostly good Hitachi 64K chips M7358-AH ML11-B U 1 Mb array, mostly good NEC 64K chips M7359 DRV11-S Q EIA/RS408 8 bit parallel I/O interface M7360 ADC11,ADA11 U Controller, hex, two slots thick M7361 ML11 U Asynchronous control M7362 ML11 U Synchronous control M7363 ML11 U ML11 array data M7386 VTV30-K Q VT30 Interface (Character serial input/output) M7452 U UNIBUS to Fiber Optic C M7454 TU80K-CP U TU80 interface (Dilog/Digital) M7455 TSU05 U TSU05 controller M7458-AA MSV11-RA Q 1-Mbyte PMI/Q22 parity memory with CSR M7458-AA (Also M7458-AC, -AH, -AJ) M7460 KA785 SBL, LOW BITS INTER. M7461 KA785 SBH, HIGH BITS INTER. M7462 KA785 CAM, CACHE ADD MATRIX M7463 KA785 CDM, CACHE DATA MATRIX M7464 KA785 TBM, CPU TRANSLATION BUF M7465 KA785 IDP, CPU INSTR DATA PATH M7466 KA785 IRC, CPU INSTRUCT DECODE M7467 KA785 DBP, CPU DATA PATH "B" M7468 KA785 DEP, CPU DATA PATH "E" M7468-YA KA785 DEP, DATAPATH MODULE,16-31 BIT M7469 KA785 DDP, CPU DATA PATH "D" M7469-YA KA785 DDP, DATAPATH MODULE,08-15 BIT M7470 KA785 DCP, CPU DATA PATH M7470-YA KA785 DCP, DATAPATH MODULE,00-07 BIT M7471 KA785 DAP, CPU DATA PATH "A" M7471-YA KA785 DAP, DATAPATH CONTROL MODULE M7472 KA785 CEH, COND CODES HIGH BIT M7473 KA785 ICL, INTR.CONT.LOW BITS M7474 KA785 CLK, CPU CLOCK M7475 KA785 JCS, JOINT CONT.STORE M7476 KA785 USC, MICRO SEQUENCER M7477 KA785 CIB CPU CONSOLE INTR M7478 KA620 Q RTVAX, 1 Mbyte, FP, TPU clock, boot/diag ROM M7478-AA KA785 Q 32 BIT SBC W/1MB, FLT. POINT M7484 U FEPCM Unibus bridge module M7485 UDA50-A U UNIBUS to radial disk interface PR board M7485 with no ROMs (SDI disk controller) M7485-YA UDA50-A U UNIBUS to radial disk interface PR board M7485-YA with blasted ROMs M7486 UDA52 U Controller for SDI disk drives (UDA SI) M7488 U UNIBUS graphics workstation M7488 (Graphics display processor) M7490 RRD50 U UNIBUS control for RRD50 M7490-YA RRD50 U UNIBUS control for RRD50 with encryption support M7493-PA R440F Q R449F (S-box) to SCSI Converter M7500 KMV1A-M Q Programmable Communications Controller M7500 Refs: EK-KMV1A-TM, EK-KMV1A-UG, MP-01173, AA-HN43B-TN M7500 Refs: ZJ360-PY M7500-Px KMV1A-Sx Q Programmable Communications Controller M7500-Px (for BA200 series enclosures) M7500-Px -PA, -SF RS232 M7500-Px -PB, -SG RS422 M7500-Px -PC, -SH RS423 M7500-Px Refs: EK-KMV1A-TM, EK-KMV1A-UG, MP-01173, AA-HN43B-TN M7500-Px Refs: ZJ360-PY M7501 KMV2A-S Q Programmable comms controller, dual line. M7502 Q Single-line high speed intelligent communication M7502 interface M7504 DEQNA-M Q Qbus to ethernet adapter, Q22, obsolete M7504 for VMS 5.x and above (use DELQA). M7504 Refs: MP-01369, EK-H4000-TM, AA-K759A-TK, EK-DEQNA-UG M7504 Refs: EB-22714-18 M7504-PA DEQNA-S Q Qbus to ethernet adapter, Q22, obsolete M7504-PA for VMS 5.x and above (use DELQA). M7504-PA (for BA200 series) M7504-PA Refs: MP-01369, EK-H4000-TM, AA-K759A-TK, EK-DEQNA-UG M7504-PA Refs: EB-22714-18 M7505 BTR01 Q Conditioning module for BTR interface M7506-AA MSV11-MA Q 512-Kbyte 18-bit RAM M7506-AA (Also M7506-AC, -AE, -AF, -AH, -AP) M7506-AA Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028 M7506-AT MSV11-MA Q 512-kbyte 22-bit parity/CSR MOS RAM M7506-AT (Also M7506-AU, -AV) M7506-AT Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028 M7506-BA MSV11-MB Q 1-Mbyte RAM M7506-BA Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028 M7506-BC MSV11-MB Q 1-Mbyte RAM M7506-BC Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028 M7506-BE MSV11-MB Q 1-Mbyte 22-bit parity/CSR MOS RAM M7506-BE Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028 M7506-BF MSV11-MB Q 1-Mbyte RAM M7506-BF Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028 M7506-BH MSV11-MB Q 1-Mbyte RAM M7506-BH Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028 M7506-BP MSV11-MB Q 1-Mbyte RAM M7506-BP Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028 M7506-BT MSV11-MB Q 1-Mbyte 22-bit parity/CSR MOS RAM M7506-BT Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028 M7506-BU MSV11-MB Q 1-Mbyte 22-bit parity/CSR MOS RAM M7506-BU Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028 M7506-BV MSV11-MB Q 1-Mbyte 22-bit parity/CSR MOS RAM M7506-BV Refs: EK-MSV1M-UG, MP-02053, uNOTE N#028 M7507 LNV11 Q Simplex 2.5MB full page bitmap memory M7507-YA LNV11 Q Duplex 2.5MB full page bitmap memory M7508 LNV11-A Q 29116 image generator processor (IGP) M7509 LNV11-A Q Q-bus/print engine interface (QPIO) M7510 LNV11-A Q Horiz line proc, 256kB font RAM (HLP) M7511 LNV11-A Q Horiz line proc, 512kB font RAM (HLP) M7512 RQDX1E Q RQDX extender for RQDX1; must be the last item in M7512 the backplane, below the RQDX1. M7513 RQDXE Q RQDX extender for RQDX2/3 M7513 (-AA for BA23, -FA for BA123). M7513 Refs: EK-RQDXE-UG M7514 BTRXX-A Q DC/DC Converter module M7515 Q 3-plane bitmap video generator for Q-bus M7516 DELQA-M Q Ethernet interface (replaces DEQNA) M7516 Refs: EK-DELQA-UG, EK-DELQA-IN M7516-PA DELQA-S Q Qbus high-performance ethernet adapter, Q22 M7516-PA (for BA200 series) (DEQTA) M7516-PA Refs: EK-DELQA-UG, EK-DELQA-IN M7516-YM DELQA-M Q Qbus to Ethernet Turbo Module, Q22 M7516-YM Refs: EK-DELQA-UG, EK-DELQA-IN M7517 VSV90 Q VSV90 Q-bus graphics module M7518 KEQDI-SA Q S-box control for internal RD's, 1 external RX M7519-AA LNV11 Q Horiz line proc, 1 MB font RAN M7521-AA DELUA-AA U UNIBUS to ethernet adapter M7521-AA (Also M7521-AJ, -AP) M7522 RUX50 U MSCP controller for RX50 M7523 LNV11 Q Duplex (QPIO) module M7524 CMR53 Q Q-bus digital input, 32 points M7525 CMR53 Q Q-bus digital output, 32 points M7526 SS-LX56A-FA Q Digital/video controller M7527 VSV22 Q Q-bus 1024*864 graphics control module M7528 CMR53 Q High speed communications controller M7529 CMR53 Q Medium speed communications controller to DRV11 M7531 DIV32-SA,F Q Q-bus ISDN BRA module for BA23/BA123 M7531-KK DIV32-SA,F Q Q-bus ISDN BRA module for BA200 series, Australia M7531-PA DIV32-SA,F Q Q-bus ISDN BRA module for BA200 series M7545 U Intelligent I/O controller M7534 DEFQA Q QBus to FDDI Interface M7540 FP785 FLOAT PT FRACT NORMALIZ M7541 FP785 FMH, FLOAT PT FRACT MULT M7542 FP785 FML, FLOAT PT FRACT MULT M7543 FP785 FAD, FLOAT PT FRAC ADDER M7544 FP785 FCT, FLOAT PT ACC CONTRL M7546 TQK50-AA Q TMSCP controller for TK50 tape unit M7546 Refs: uNOTE N#041 M7547 TUK50-AA U TMSCP controller for TK50 tape unit M7549 Q Alternate buffer DMA interface for Q22 bus M7551-AA MSV11-QA Q 1-Mbyte 22-bit parity/CSR MOS RAM M7551-AA (Also M7551-AC, -AE, -AF, -AH, -AJ, -AP) M7551-AA Refs: EK-MSV1Q-UG, MP-01931, ZJ246-RZ, uNOTE N#031 M7551-BA MSV11-QB Q 2-Mbyte 22-bit parity/CSR MOS RAM M7551-BA (Also M7551-BC, -BE, -BF, -BH, -BJ, -BP, -BT, -BV) M7551-BA Refs: EK-MSV1Q-UG, MP-01931, ZJ246-RZ, uNOTE N#031 M7551-CA MSV11-QC Q 4-Mbyte 22-bit parity/CSR MOS RAM M7551-CA (Also M7551-CC, -CE, -CF, -CH, -CP, -CT, -CV) M7551-CA Refs: EK-MSV1Q-UG, MP-01931, ZJ246-RZ, uNOTE N#031 M7552 KRP50 Q RRD40-HB/-HD/RRD50 Optical Disk Controller Module M7552 (also KRQ50-AA, KRQ50-SA, KRQ50-SF) M7552 Refs: EK-RRD50-UG, EK-RRD50-PS M7553 Q QBus Console Module (link to mainframe VAX) M7554 KDJ11-DA Q J11 CPU 15MHz, 512-Kbyte RAM, 2 SLUs, LTC M7554 Refs: EK-KDJ1D-UG M7554-01 KDJ11-DA Q J11 CPU 15MHz, 512-Kbyte RAM, 2 SLUs, LTC (VE) M7554-01 Refs: EK-KDJ1D-UG M7554-02 KDJ11-DB Q 11/53-PLUS CPU M7554-02 (J11 15MHz, 1.5-Mbyte RAM, 2 SLU, LTC) M7554-02 Refs: EK-KDJ1D-UG M7554-04 KDJ11-DD Q J11 CPU 18MHz, 1.5-Mbyte RAM, 2 SLUs (CSS) M7554-04 Refs: EK-KDJ1D-UG M7554-PA KDJ11-SA Q J11 CPU 15MHz, 512-Kbyte RAM, 2 SLUs M7554-PA with S-box handle M7554-PA Refs: EK-KDJ1D-UG M7554-PB KDJ11-SB Q J11 CPU 18MHz, 512-Kbyte RAM, 2 SLUs, LAT PROM, M7554-PB with S-box handle M7554-PB Refs: EK-KDJ1D-UG M7554-PC CMR53-AA Q J11 CPU 18MHz, 512-Kbyte RAM, 2 SLUs M7554-PC with S-box handle, CMR53 boot PROM M7554-PC Refs: EK-KDJ1D-UG M7554-SA KDJ11-SA Q J11 CPU 15MHz, 512-Kbyte RAM, 2 SLUs M7554-SA with S-box handle (VE) M7554-SA Refs: EK-KDJ1D-UG M7554-SC KDJ11-SC Q J11 CPU 15MHz, 512-Kbyte RAM, 2 SLUs M7554-SC with S-box handle (VE) M7554-SC Refs: EK-KDJ1D-UG M7554-SD KDJ11-SD Q J11 CPU 18MHz, 1.5-Mbyte RAM, LAT ROM M7554-SD with S-box handle M7554-SD Refs: EK-KDJ1D-UG M7554-SE KDJ11-SE Q J11 CPU 18MHz, 1.5-Mbyte RAM, 2 SLUs, LTC, M7554-SE with S-box handle M7554-SE Refs: EK-KDJ1D-UG M7554-YA KDJ11-SA Q J11 CPU 15MHz, 512-Kbyte RAM, 2 SLUs, LTC, M7554-YA no handle M7554-YA Refs: EK-KDJ1D-UG M7554-YB KDJ11-SB Q J11 CPU 15MHz, 512-Kbyte RAM, 2 SLUs, LAT PROMs, M7554-YB no handle M7554-YB Refs: EK-KDJ1D-UG M7555 RQDX3 Q MFM Winchester and floppy disk controller M7555 (RX50/RX33/RD50-54/RD31/RD32/RD33) M7555 Refs: EK-RQDX3-UG, uNOTEs N#041, N#043 M7555-YA RQDX3-SD Q Controller for RX33D 48TPI floppy disk drive M7556 U Mininum load module +5V 1A -15V 375mA, 11/84 M7558 MSV11 Q 2-Mbyte 22-bit MOS memory M7558-AA MSV11-SA Q 2-Mbyte 22-bit parity/CSR MOS RAM M7558-AA (Also M7558-AC, -AE, -AF, -AL, -AP, -AR, -AU, -AV) M7559 TQK70 Q TMSCP controller for TK70 M7573 RQDX4 Q Controller for RX35, RD50/1/2/3/4 M7602 VCB01, QVSS Q Qbus Video Sub System module for Q22 systems M7602 (uVAX I, II) M7602-YA VCB01, QVSS Q Qbus Video Sub System module, bitmap graphics M7602-YA option. (uVAX I, II) M7605 TQK25 Q 0.25" streaming tape drive controller (TK25) M7605 Refs: uNOTE N#041 M7606-AA KA630-AA Q MicroVAX II CPU w/1-Mbyte, floating point, time of M7606-AA year clock, boot/diagnostic ROM, Q22 M7606-AA (Also M7606-AC, -AF, -AH, -AL, -AP, -AS M7606-AA Also M7606-EC, -EE, -EF, -EP, -ES, -ET, -EU, -EV M7606-AA Also M7606-ZC, -ZF, -ZP, -ZS) M7606-AA Refs: EK-KA630-UG, EK-KD32-OM, EK-KD32A-OM M7606-AA Refs: uNOTEs N#022, N#024, N#026 M7606-AB KA630-AB Q MicroVAX II CPU, floating point. M7607-AA MS630-AA Q 1-Mbyte RAM for MicroVAX II M7607-AA (Also M7607-AC, -AE, -AH, -AL, -AP, -AR, -AS, -AT, M7607-AA -AU, -AV, -ZC, -ZF, -ZS) M7608-AA MS630-BA Q 2-Mbyte RAM for KA630 (MicroVAX II) M7608-AA (Also M7608-AC, -AE, -AH, -AL, -AP, -AR, -AS, -AT, M7608-AA -AU, -AV) M7608-BA MS630-BB Q 4-Mbyte RAM for KA630 (MicroVAX II) M7608-BA (Also M7608-BC, -BE, -BH, -BL, -BP, -BR, -BS, -BT, M7608-BA -BU, -BV, -YC, -YF, -YS, -ZC, -ZF, -ZS) M7609-AA MS630-CA Q 8-Mbyte parity 36-bit RAM for KA630 (MicroVAX II) M7609-AA (Also M7609-AC, -AF, -AH, -AP, -AV) (Q22 via CD) M7616 KXJ11-CA Q J11 CPU, 512-Kbyte RAM, 64-Kbyte PROM M7616 (Q22 peripheral processor) M7620 KA650-AA/BA Q MicroVAX III CPU (-AA full license, -BA M7620 workstation license), 90nS. M7620 Refs: EK-KA650-UG M7621 MS650-AA Q 8-Mbyte RAM for KA650 (MicroVAX III) M7622 MS650-BA Q 16-Mbyte RAM for KA650 (MicroVAX III) M7624 KA640-AA Q MicroVAX 3300/3400 CPU: CVAX chip, Ethernet, M7624 DSSI, 4 Mbyte memory (640QR) *** 640QR M7625 KA655-BA Q MicroVAX III CPU (workstation license), 60nS M7626 KA660 Q VAX 4000 CPU, 57MHz, Q22, DSSI, ethernet M7634-PA IEQ11 Q IEEE interface M7635-AA KN210 Q DS5400, RISC 3000 CPU, Qbus interface M7635-AB KN210 Q M7635-AA with LSI R3000, R3020 chips M7635-AC KN210 Q M7635-AA with PERF R3000, R3020 chips M7636 Q I/O Module, DSSI Interface, Ethernet M7637 KN220 Q DS5500 CPU Module, Memory Control, 64Kb M7637 I&D Caches M7638 Q DS5500 I/O MOD @25MHZ W/QBUS,DSSI,SC M7639 MS220 Q DS 5500 64MB ECC MEM ARRAY M7651 DRV11-WA Q 18/22-bit DMA general purpose parallel interface M7651 Refs: EK-DRVWA-UG, MP-01582, ZJ244-RZ, uNOTE N#041 M7651-PA DRV1W-S Q General-Purpose DMA Interface M7651-PA (for BA200 series) M7651-PA Refs: EK-DRVWA-UG, MP-01582, ZJ244-RZ, uNOTE N#041 M7651-YB DRV11-WA Q M7651, revision C circuit M7651-YB Refs: EK-DRVWA-UG, MP-01582, ZJ244-RZ, uNOTE N#041 M7656 VSV21-AA Q Colour graphics module: M68K processor, HD63486 M7656 video processor (512x512 or 512x256 resolution), M7656 Serial ports for mouse, trackball, console and M7656 LK201. M7658 DRQ3B-A Q 2 x 16 bit, High-Speed, bidirectional Parallel M7658 interface w/DMA and Block Mode M7658 Refs: EK-O47AA-UG M7658-PA DRQ3B-S Q High-Speed, Parallel Interface M7658-PA (for BA200 series) M7658-PA Refs: EK-O47AA-UG M7676 KXT11-AB Q Single-board 16-bit CPU (dual height). M7676 16-Kbytes of static RAM M7676 64-Kbytes of direct addressing capability M7676 PDP-11 base level instruction set M7676 50, 60 or 800Hz realtime clock M7676 24-line parallel I/O M7676 Two async serial I/O ports M7676 Four 28-pin memory sockets for up to 16-Kbytes of M7676 additional RAM and 16-Kbytes of ROM, or an extra M7676 32-Kbytes of RAM or 32-Kbytes of ROM. M7676 (T11 processor) (FALCON-PLUS) (SBC-11/21-PLUS) M7676 Refs: EK-SBC02-CG, EK-SBC02-UG, EK-SBCOP-IN, uNOTE N#015 M7677 MDM U 11/84 monitor and distribution monitor M7677-YA MDM(?) U 11/84-A monitor (fan, blower, I/O distribution) M7679 ISDN Q ISDN basic rate access Qbus board M7680 RK05 RK05 M7681 RK05 CYLINDER ADDRESS + TRACK DIFF M7684 RK05 CONTROL SEQUENCER M7685 ???????? ? Data Sequencer for RM02/03, can be replaced M7685 by M8685 M7686 ???????? ? RM02/03 Control Interface M7687 ???????? ? ??? M7690 VTV31-KA Q? RGB Bitmap 348Hx256V 50Hz M7691 VTV31-KB Q? RGB Bitmap 348Hx240V 60Hz M7693 VTV31-KD Q? RGB Bitmap 512Hx240V 60Hz M7700 RK05 RK05 unit-sel/photoamp/sector-counter M7700 (Replaced by M7680) M7701 DEC PAK CONTROL & INTERLOCK M7705 RK06 RK06 MODULE M7706 RK06 RK06 MODULE M7707 RK06 RK06 SERVO CONTROL,QUAD M7708 RK06 RK06 TRACK POSITION DETECTOR M7726 RX01 - 8" floppy disk controller (internal board) M7727 RX01 - 8" floppy disk read/write (internal board) M7728-YC - M7728 ETCH REV L AND LATER M7729 RK06 - RK06,SERVO ANALOG,(REPLACES M M7730 RK06 - RK06 DUCIL PORT LOGIC BOARD M7736 LA36 - LA36 HT VT TOF OPTION,DOUBLE M7740 RQC25 Q Qbus to LESI bus adapter used on disks with M7740 MSCP. RC25 controller. Replaces M8654. Q22. M7740 (Also M7740-01, -PA) (Also called KLESI-QA and M7740 used as the controller for a TU81-Plus) M7740 Refs: EK-ORC25-PS, EK-ORC25-UG, MP-01612, ZJ350-RZ M7740 Refs: uNOTE N#041 M7744 RX02 - 8" floppy disk controller (internal board) M7744 Refs: MP-00629 M7745 RX02 - 8" floppy disk read/write (internal board) M7745 Refs: MP-00629 M7760 TU60 - Cassette logic (internal board) M7761 TU60 - Cassette servo and read (internal board) M7762 RL11 U RL01/02 disk controller M7762 Refs: MP-00153 M7769 KFQSA-A Q Storage Adapter (DSSI Disk Interface), BA23 M7769 Refs: EK-KFQSA-IN M7769 KFQSA-B Q Storage Adapter (DSSI Disk Interface), BA123 M7769 Refs: EK-KFQSA-IN M7769 KFQSA-S Q Storage Adapter (DSSI Disk Interface), BA200 series M7769 Refs: EK-KFQSA-IN M7773 RP04 ASYNCHRONOUS LOGIC M7774 RP04 REGISTER LOGIC M7776 RP04 ERROR CORRECTION LOGIC, 4 M7786 RP05/06 SEEK SEARCH CONT M7787 RP05/06 INTERFACE CONTROL M7788 RP05/06 MINIMUM DEVICE LEVEL I M7789 RP05/06 INTERFACE RECEIVER M7792 DEUNA U DEUNA port module, UNIBUS to ethernet M7792 microprocessor. (1 of 2) M7793 DEUNA U DEUNA link module, M7792 to ethernet bus M7793 line unit. (2 of 2) M780 KL11 U Teletype transmitter & receiver for KL11, 110 baud M780-YB KL11 U 150 baud M780 M780-YC KL11 U 300 baud M780 M780-YD KL11 U 600 baud M780 M780-YE KL11 U 1200 baud send, 110 baud receive M780 M780-YF KL11 U 2400 baud M780 M780-YH KL11 U Used in PMK02-C option M780-YS KL11 U 307-Kbaud M780 for KL11-S Tektronix 4010 series M780-YS terminals. M7800 DL11 U Async transmitter & receiver, 110-2400 baud, M7800 no clock (Replaces KL11, which consisted of M780, M7800 M105, M782) M7800 Refs: uNOTE N#033 M7800-YA DL11 U M7800 without EIA chips, current loop only M7800-YA Refs: uNOTE N#033 M7800-YB DL11 U M7800 with 24.6-Kbaud M7800-YB Refs: uNOTE N#033 M7800-YC DL11 U M7800 with filter on ring circuit for use with M7800-YC EMI filter cable M7800-YC Refs: uNOTE N#033 M7801 MC11 U Data word control for MC11 (-YA is for MC11-B) M7802 MC11 U Address control for MC11 (-YA is for MC11-B) M7803 MC11 U Arbitration control for MC11 M7803-YA MC11 U Arbitration control with parity for MC11 M7803-YB MC11 U High speed M7803-YA, will be replaced by M7869 M7807 DV11 U Bus control and MUX for DV11 M7807 (fits in DV11 backplane) M7808 DV11 U Modem control scan and MUX for DV11 M7808 (fits in DV11 backplane) M7809 AR11 U 16 Channel 10 bit A/D, 1 ch D/A M781 PC11 U PC11 control board for KA11 M781 (Requires M105 and M782 or M7820 or M7821) M7810 PC11 U Paper tape reader/punch controller M7812 DQ11-AA U Bus selectors, CSRs, shift registers M7813 DQ11-AA U Character count, bus address, shift control M7814 DZ11-C U 8-line 20mA data MUX, 50 to 100-Kbaud M7814 (also DZ11-D, DZ11-F) M7814 Refs: EK-DZ110-OP, MP-00253 M7815 DQ11-AA U Modem control (DQ11-BA) M7816 DQ11-AB U Bus selectors and block check M7817 DQ11-AB U Character detection and sequence control(DQ11-BB) M7818 DQ11-AA U Hardwired char detection and NPR control M7819 DZ11-A U 8-line double-buffered async EIA M7819 with modem control (50 to 96-Kbaud, 64-byte silo) M7819 (also DZ11-B, DZ11-E) M7819 Refs: EK-DZ110-OP, MP-00132 M782 KL11 U Interrupt control, 6-bits, 1 per PDP11 peripheral M7820 KW11 U Interrupt control, 7-bits, 1 per PDP11 peripheral M7820 (Replaced by M7821) M7821 KW11 U Fast M7820 M7822 DU11 U Synchronous serial line interface. Max 9600 M7822 baud. Bell 200 series modems. Optional M7822 DCF11-A clock available. M7823 KW11-W U Watchdog timer module M7824 CP11-UP U Punch interface, CP11-UP M7826 DVS11 U Serial line xmit/receiver, sync, async, isosync M7828 DT03 U Remote DT03 bus switch control M783 U Bus transmitters 12 drivers, mixed logic M7833 DV11 U Line card, 4 async lines for DV11 M7833 (fits in DV11 backplane) M7835 DD11 U Tone alert used in DD11 M7836 DV11 U ALU and transfer bus for DV11 M7836 (fits in DV11 backplane) M7837 DV11 U UNIBUS data and NPR control for DV11 M7837 (fits in DV11 backplane) M7838 DV11 U ROM, RAM and branch for DV11 M7838 (fits in DV11 backplane) M7839 DV11 U Line card, 4 async lines for DV11 M7839 (fits in DV11 backplane) M784 U Bus receiver (16 receivers), single in/single out M784-YA U M784, non-inverting M7840 KE11-B U Extended Arithmetic Element, KE11-A Compatible M7843 DR11-K U Digital I/O M7843-YA DR11-K U M7843 with fusible resistor replaced by diode M7845 U Time out for boeing interface M7846 RX11 U RX01 floppy disk controller M7847-AA MS11-E U Either M7847-BA, -CA, -DA or -EA M7847-AB MS11-EP U Either M7847-BB, -CB, -DB or -EB M7847-AD MS11-FP U Either M7847-BD, -CD, -DD or -ED M7847-AJ MS11-JP U Either M7847-BJ, -CJ, -DJ or -EJ M7847-BB MS11-EP U 4-Kword 18-bit RAM M7847-BD MS11-FP U 8-Kword 18-bit RAM M7847-BF MS11-HP U 12-Kword 18-bit RAM M7847-BJ MS11-JP U 16-Kword 18-bit RAM M7847-CB MS11-EP U 4-Kword 18-bit RAM M7847-CD MS11-FP U 8-Kword 18-bit RAM M7847-CJ MS11-JP U 16-Kword 18-bit RAM M7847-DB MS11-EP U 4-Kword 18-bit RAM M7847-DD MS11-FP U 8-Kword 18-bit RAM M7847-DJ MS11-JP U 16-Kword 18-bit RAM M7847-EB MS11-EP U 4-Kword 18-bit RAM M7847-ED MS11-FP U 8-Kword 18-bit RAM M7847-EE MS11-H U 12-Kword 16-bit RAM M7847-EJ MS11-JP U 16-Kword 18-bit RAM M7847-YA MS11-E U 4-Kword 16-bit RAM M7847-YB MS11-EP U 4-Kword 18-bit RAM M7847-YC MS11-F U 8-Kword 16-bit RAM M7847-YD MS11-FP U 8-Kword 18-bit RAM M7847-YE MS11-H U 12-Kword 16-bit RAM M7847-YF MS11-HP U 12-Kword 18-bit RAM M7847-YJ MS11-JP U 16-Kword 18-bit RAM M785 U Bus transceiver, 8 drivers/8 receivers (8-bit) M7850 MM11-BP/CP U Parity board for G651, MS11-EP/FP/HP/JP M7855 U UNIBUS exercisor and tester M7856 DL11-W U RS-232 SLU & realtime clock option M7856 Refs: uNOTE N#033 M7856-YA DL11-W U M7856 with 110 to 19.2-Kbaud option M7856-YA Refs: uNOTE N#033 M7857 DL11-L U SLU & realtime clock, option, with RS449 capability M7859 KY11-LB U Console interface; programmer's console (11/34a) M786 U Device Register Interface M7860 DR11-C U M786+M105+M7821; general device interface to PDP11 M7864 DR11-L U DR11-L, 2 word unibus input interface M7864-YA U M7864 modified for chrono-log clock interface M7864-YB U M7864 modified for use with M5864 optical I/O Converter M7865 DR11-M U Two word unibus output interface M7867 DUP11-DA U SDLC or DDCMP sync interface M7867 Refs: EK-DUP11-MM, EP-DUP11-MM M7869 MC11-B U Arbitration control (replaces M7803-YB) M787 KW11-L U Line frequency clock M7870 KU116 U 11/60 writable control store module M7871 KD11-K U 11/60 diagnostic control store module M7871-YA KD11-K U 11/60 extended control store module M7872 KD11-K U 11/60 micro word module M7873 KD11-K U 11/60 decode module M7874 KD11-K U 11/60 data paths module M7875 KD11-K U 11/60 cache kit (memory & MMU) M7876 KD11-K U 11/60 timing module M7877 KD11-K U 11/60 status module M7878 FP11-E U 11/60 FNUA (Floating point Next micro Address) M7879 FP11-E U 11/60 exponent module M788 MR11-A U Control logic module M7880 FP11-E U 11/60 FFP MULNET module M7881 FP11-E U 11/60 FALU module (Floating point Arithmetic M7881 Logic Unit) M7883 CPI32 U 24 channel data mux, async M7883-YA CPI32 U M7883 with async and sync M7884 CPI32 U Unibus interface card, async M7884-YA CPI32 U Unibus interface card, async and sync M7890 DT03 U DT03 power sequence control M7891-AH MS11-LA U 32-Kword 18-bit parity RAM (Also M7891-AL) M7891-BA MS11-LB U 64-Kword 18-bit parity MOS memory M7891-BA (Also M7891-BB, -BC, -BD, -BE, -BF, -BH, -BL) M7891-CH MS11-LC U 96-Kword 18-bit parity RAM (Also M7891-CL) M7891-DA MS11-LD U 128-Kword 18-bit parity MOS memory M7891-DA (Also M7891-DB, -DC, -DD, -DE, -DF, -DH, -DL) M7892 U M7292 with 8881 & 380 (TU60 interface) M7893-YA DRS11 U 48 TTL outputs M7893-YB DRS11 U 48 open collector outputs M7893-YC DRS11 U M7893-YA with data strobe M7894 DRS11 U 48 optical isolated outputs M7895-YA DSS11 U 48 5V optical isolated inputs M7895-YB DSS11 U 48 24V optical isolated inputs M7895-YE DSS11 U DSS11-AB, 48 5V optical isolated inputs, fast M7896-YA DSS11 U 48 24V contact sense inputs M7897 PMK05 U Indicator board M7899 DZ32 U DZ32 80line async mux modem control M7900 RK611 U RK06/07 Unibus interface, hex M7901 RK611 U RK06/07 register module, hex M7902 RK611 U RK06/07 control module, hex M7903 RK611 U RK06/07 data module, hex M7904 RK611 U RK06/07 drive interface module, hex M7906 RK07 U RK07 servo control M7907 RK07 U RK07 servo analogue board M7908 RK07 U RK07 track position detector/PLO M7909 DZ32 U DZ32 attenuated loop back input tester M791 U LA30 interface for PDP-11 M7910 U M791+M105+M7821, parallel interface between PDP-11 M7910 and LA30P. M7911 TMB11 U TMB11 tape control 1 M7912 TMB11 U TMB11 tape control 2 M7914 DPQ11-A Q Synchronious line interface M7915 IEC11-B U IEC11-B (IEEE interface) control M7917 PTV11-PA PT02 Papertape reader interface M792 U 32-word, 16-bit ROM diode matrix, all diodes in M792 (used in DD11) M792-YA U Papertape bootstrap loader for Teletype or M792-YA high-speed papertape reader (PC11) M792-YB U Disk/DECtape bootstrap loader M792-YC U Card Reader bootstrap loader (CR11) M792-YD MR11-DB U Bootstrap loader (11/45) (1 of 2) M792-YE MR11-DB U Bootstrap loader (11/45) (2 of 2) M792-YF U DS500 loader ROM M792-YH U TA11 bootstrap loader M792-YJ TM11 U Bell special TM11 loader M792-YK U VT20 bootstrap M792-YL U RX11 floppy loader M7920 PC11-F U SPC controller for facit reader/punch M7921 MA11-F U MA11-F data multiplexer M7922 MA11-F U MA11-F address multiplexer M7923 MA11-F U MA11-F multiplexer control M7924 MA11-F U MA11-F unibus interface M7928 DZV11 Q Sync serial line, with auto re-sync M7929 U Milliken high speed data mirroring M7930 LP11 U M793+M105+M7821, interface to Data Products line M7930 printers M7932 DRS11 U 48 channel output M7933 DRS11-X U 48 channel output with output conditioning M7934 DSS11 U 48 channel input M7935 DSS11-X U 48 channel input with input conditioning M7936 DV11 U Ors 2 DV11 on a TTL level and drives EIA or MIL188 M7937 MA11-KA U Programmable port control for MA11-F, MA11-H M7939 DZS11-C U 8-line async mux, EIA I/O M794 DC11-D U Modem interface & control card M7940 DLV11 Q Serial Line Unit (SLU, Async) M7940 Refs: MP-00055, EB-20175-20, uNOTE N#033 M7940-YA DLV11 Q M7940 with extra wires to bring out clock & M7940-YA 110/300 speed change M7940-YA Refs: MP-00055, EB-20175-20, uNOTE N#033 M7940-YC DLV11 Q Modified M7940 for use in a tester, TTL in/out M7940-YC Refs: MP-00055, EB-20175-20, uNOTE N#033 M7940-YD DLV11 Q Modified M7940 for use in a tester, switchable M7940-YD baud rate M7940-YD Refs: MP-00055, EB-20175-20, uNOTE N#033 M7940-YE DLV11 Q Modified M7940 for use in a tester, XON/XOFF M7940-YE Refs: MP-00055, EB-20175-20, uNOTE N#033 M7941 DRV11 Q 16-bit parallel line unit M7941 Refs: EK-ADV11-OP, MP-00054, EB-20175-20, ZJ244-RZ M7941 Refs: MP-00866 (unconfirmed) M7942 MRV11-AA Q Space for 4K 16-bit PROM M7942 Refs: MP-00066 M7942-YA MRV11-VA Q VT71T bootstrap M7942-YB MRV11-AA Q M7942 with VT52 emulator, VT71 bootstrap M7942-YC MRV11-VC Q VT72 bootstrap/diagnostic module M7942-YD MRV11-AA Q M7942 with CSR11 bootstrap M7944 MSV11-B Q 4-Kword 16-bit MOS RAM (external refresh) M7946 RXV11 Q RX01 8" floppy disk controller M7946 Refs: EK-RXV11-OP, MP-00024, EB-20175-20, ZF220-RZ M7948 DRV11-P Q LSI-11 bus foundation module. Basic Qbus M7948 interface board with space for wire-wrapping. M7948 Refs: EK-DR11-OP, MP-00119, EB-20175-20 M7949 LAV11 Q LA180 line printer control module M7949 Refs: EK-LAV11-OP, MP-00306 M795 U Word count and bus address module M7950 DRV11-B Q 16-bit parallel general purpose interface M7950 w/18bit DMA (quad) M7950 Refs: EK-DRV1B-OP, MP-00160, EB-20175-20, ZJ244-RZ M7951 DUV11-DA Q Sync interface, character protocol M7951 DU11-DA compatible M7951 Refs: EK-DUV11-OP, EK-DUV11-TM, MP-00297, EB-20175-20 M7951 Refs: ZJ237-RZ M7952 KWV11-A Q Programmable realtime clock M7952 Caution: uses BC1 for purposes other than BDAL18 M7952 Refs: EK-ADV11-OP, MP-00200, EB-20175-20, uNOTE O#108 M7953 MNCKW ? MINC programmable real time clock M7954 IBV11 Q IEC general purpose interface (IEEE 488/GPIB) M7954 Refs: EK-IBV11-TM, IEEE Std. 488-1975, MP-00274, EB-20175-20 M7955-AD MSV11-CD Q 16-Kword 16-bit MOS RAM with on-board refresh, M7955-AD 18-bit addressing only. M7955-AD (Also M7955-YD, -YJ, -BD, -BJ, -CD, -CJ, -DD) M7955-YA MSV11-CA Q 4-Kword 16-bit MOS RAM with refresh M7955-YB MSV11-CB Q 8-Kword 16-bit MOS RAM with refresh M7955-YC MSV11-CC Q 12-Kword 16-bit MOS RAM with refresh M7955-YD MSV11-DC Q 16-Kword 16-bit MOS RAM with refresh M7957 DZV11-M Q 4-line double-buffered async EIA MUX M7957 (With modem control, 50 to 10-Kbaud) (quad) M7957 Refs: EK-DZV11-TM, MP-00462, EB-20175-20, EK-DZV11-UG M7957 Refs: ZJ251-RZ M7958 IP11 Q Q-bus to I/O daisy chain bus control and interface M7959 IP11 Q Q-bus to D-bus cable (-PA for S-box, -YA for no M7959 handle) M796 U Unibus master control, used with M782 M7966 DZS11-A U 8-line async MUX, diff balanced long line I/O M7966 (To be replaced by M8715) M7967 DZS11-B U 8-line async MUX, TTL I/O M7967 used with M5926 for 20mA loop. M7968 VW01-G U Writing tablet control M7969 KW11-A U Watchdog timer M797 U Register select module, used with M105 M7970 TMS11-W U Command and status register M7971 TMS11-W U Data control and CRCC logic M7972 TMS11-W U Tape motion control M7973 VT30-C, -D U VT30 timing and CSR M7974 VT30-C U VT30-C picture store M7975 VT30-D U VT30-D picture store M7976 VT30-C U VT30-C scratch pad and character store M7977 VT30-D U VT30-D scratch pad and character store M7978 VT30-C, -D U VT30-C, -D color control M7979 VT30-C, -D U VT30-C, -D unibus decode M798 U 16 non-inverting UNIBUS drivers M7980 DD11 U AC/DC lo monitor, 8-pin mate-n-lock output M7982 TS11 U Serial tape control module M7983 MF11 U MF11-S through MF11-K control module M7984-EA MS11-KE * Either M7984-EB, -EC or -ED M7984-EB MS11-KE * 16-Kword 39-bit MOS RAM array M7984-EC MS11-KE * 16-Kword 39-bit MOS RAM array M7984-ED MS11-KE * 16-Kword 39-bit MOS RAM array M7984-ED (*Note: M7984-xx fit into the 11/70's MK11 M7984-ED memory box. MS11-KD is 32-Kword and MS11-KC M7984-ED is 128-Kword.) M7985 IEC11-A U IEC bus interface M799 AA11 U Display control for AA11 M7990 LAB11 U LAB11 color control M7991 PCL11-B U PCL11-B transmitter interface M7992 PCL11-B U PCL11-B transmitter unibus control M7993 PCL11-B U PCL11-B transmitter registers M7994 PCL11-B U PCL11-B transmitter bus logic and drivers M7995 PCL11-B U PCL11-B receiver registers M7996 PCL11-B U PCL11-B receiver unibus control M7997 PCL11-B U PCL11-B receiver interface M7998 PCL11-A U differential transceiver (replaced by M8003) M8003 PCL11-B U PCL11-B TDM differential bus transceiver M8005 IDV11 Q 16-bit relay output (-PO for S-box handles) M8006-PA Q 72-bit opto-isolated output module M8007-PA Q 72-bit opto-isolated input module M8010 PCV11 Papertape reader-punch M8012 BDV11 Q Bus terminator, bootstrap and diagnostic ROMs M8012 (CS revision E or earlier, 18 bits only) M8012 (CS Rev. E or later, ECO M8012-ML005 installed) M8012 Refs: EK-BDV11-TM, MP-00489, EB-20175-20, uNOTEs N#003 M8012 Refs: N#015, N#035 M8012-YA BDV11 Q Bus terminator (120 ohm), bootstrap and M8012-YA diagnostic ROMs, 18-bit only M8012-YA Refs: EK-BDV11-TM, MP-00489, EB-20175-20, uNOTEs N#003 M8012-YA Refs: N#015, N#035 M8013 RLV11 Q RL01 disk controller, 1 of 2 M8013 18-bit DMA only M8013 Caution: uses BC1 and BD1 for purposes other M8013 than BDAL18 and BDAL19 M8013 Refs: EK-RLV11-TD, MP-00635, EB-20175-20 M8014 RLV11 Q RL01 bus controller, 2 of 2 M8014 18-bit DMA only M8014 Caution: uses BC1 and BD1 for purposes other M8014 than BDAL18 and BDAL19 M8014 Refs: EK-RLV11-TD, MP-00635, EB-20175-20 M8015 CSC11 Q Q-bus CSC11-RA interface M8016 KPV11-A Q Power fail, realtime clock, no termination M8016 Refs: MP-00356, EB-20175-20 M8016-YB KPV11-B Q M8016 with 120-ohm termination (18-bit only) M8016-YB Refs: MP-00356, EB-20175-20 M8016-YC KPV11-C Q M8016 with 250-ohm termination (18-bit only) M8016-YC Refs: MP-00356, EB-20175-20 M8017-AA DLV11-E/EC Q Single-line async control module M8017-AA (Replaces M8017, M8017-YB) M8017-AA Renamed DLVE1 M8017-AA Refs: EK-DLV11-OP, MP-00460, EB-20175-20, ZJ243-RZ M8017-AA Refs: uNOTE N#033 M8017-PA DLV11-E/EC Q Single-line async control module with S-box handle M8017-PA Refs: EK-DLV11-OP, MP-00460, EB-20175-20 M8018 KUV11-AA Q Writable control store module, for use with M8018 KD11-F (LSI-11/03) only. M8018 Refs: EK-KUV11-TM, MP-00571 M8020 DPV11-M Q Single-line serial EIA sync interface M8020 Refs: EK-DPV11-UG, MP-00919, EK-DPV11-CG, EK-DPV11-TM M8020 Refs: EP-DPV11-TM, ZJ314-RZ M8020-PA DPV11-S Q Single-line serial sync interface M8020-PA (for BA200 series enclosures) M8020-PA Refs: EK-DPV11-UG, MP-00919, EK-DPV11-CG, EK-DPV11-TM M8020-PA Refs: EP-DPV11-TM, ZJ314-RZ M8021 MRV11-BA Q 256-word RAM, space for 4-Kword UV PROM M8021 16-bit addressing only M8021 Refs: EK-MRV11-YM, MP-00354 M8022 DRQ11-B Q DRQ11-A + Alt. buffering M8024 CEV11-A Q CEV11-A Q-bus interface M8025 CE11, CEV11 Q CE11, CEV11-A control M8026 NCV11-A Q DMA controller M8027 LPV11 Q Printer Interface Module (centronics) M8027 Refs: EK-OLP11-TM, EK-LPV11-OP, MP-00467 M8027-P LPV11-S Q Printer Interface Module (centronics) M8027-P (for BA200 series enclosures) M8027-P Refs: EK-OLP11-TM, EK-LPV11-OP, MP-00467 M8028 DLV11-F Q Async interface EIA/20mA, error flags, break bit M8028 Refs: EK-DLV11-OP, MP-00461, EB-20175-20, uNOTE N#033 M8029 RXV21 Q RX02 floppy disk controller, 18-bit DMA only. M8029 Refs: MP-00628, EB-20175-20 M8034-YC DRL11-A U 48 channel output module, TTL output M8034-YD DRL11-B U 48 channel open collector TTL output M8035-YC DSL11-A U 48 channel optocoupled input, TTL in M8035-YD DSL11-B U 48 channel optocoupled input, 24VDC in M8036 NCV11-A Q Q-bus control for NCV11-A M8040 DRV11-C Q 16-bit parallel line unit M8041 VT30-H Q Q-bus control for VT30-H M8043 DLVJ1-M Q 4-Line Asynchronous Interface (formerly DLV11-J) M8043 (CS Rev. E or earlier incompatible with KDF11-A M8043 and KDF11-B) M8043 (CS Rev. E or later, ECO M8043-MR002 installed) M8043 Refs: EK-DLV1J-UG, MP-00586, EB-20175-20, ZJ269-RZ M8043 Refs: uNOTE N#033 M8044-AA MSV11-DA Q 4-Kword 16-bit MOS RAM M8044-AA (Also M8044-AB, -AC, -AD) M8044-AA Refs: EK-MSVI1-OP, MP-00566 M8044-BA MSV11-DB Q 8-Kword 16-bit MOS RAM M8044-BA (Also M8044-BB, -BC, -BD) M8044-BA Refs: EK-MSVI1-OP, MP-00566 M8044-CA MSV11-DC Q 16-Kword 16-bit MOS RAM M8044-CA (Also M8044-CB, -CC, -CD, -CE, -CF, -CH, -CL, -CM) M8044-CA Refs: EK-MSVI1-OP, MP-00566 M8044-DA MSV11-DD Q 32-Kword 16-bit MOS RAM M8044-DA (Also M8044-DB, -DC, -DD, -DE, -DF, -DH, -DL, -DM) M8044-DA Refs: EK-MSVI1-OP, MP-00566 M8045-AB MSV11-EA Q 4-Kword 18-bit MOS RAM M8045-AB Refs: EK-MSVI1-OP, MP-00567 M8045-BA MSV11-EB Q 8-Kword 18-bit MOS RAM M8045-CH MSV11-EC Q 16-Kword 18-bit MOS RAM M8045-CH (Also M8045-CJ, -CK, -CL) M8045-CH Refs: EK-MSVI1-OP, MP-00567 M8045-DA MSV11-ED Q 32-Kword 18-bit MOS RAM M8045-DA (Also M8045-DB, -DC, -DD, -DH, -DJ, -DK, -DL) M8045-DA Refs: EK-MSVI1-OP, MP-00567 M8046 DLV11-L Q DLV11 with differential drive like M5946 M8047-AA MXV11-AA Q 4-Kword RAM, 2 async EIA SLU, sockets for 2 M8047-AA 24-pin 5V ROMs (Also M8047-AB, -AC, -AD, -AE) M8047-AA (18-bit addressing only on memory) M8047-AA Refs: MP-00730, uNOTEs N#003, N#004, N#015, N#020, N#033 M8047-AA Refs: uNOTE O#106 M8047-CA MXV11-AC Q 16-Kword RAM, 2 async EIA SLU, sockets for 2 M8047-CA 24-pin 5V ROMs M8047-CA (Also M8047-CB, -CC, -CD, -CE, -CF, -CH, -CM) M8047-CA Refs: MP-00730, uNOTEs N#003, N#015, N#020, N#033 M8047-CA Refs: uNOTE O#106 M8047-HA MXV11-HA Q 16-Kword RAM, 2 async EIA SLU (8 bits + parity), M8047-HA sockets for 2 24-pin 5V ROMs, 1-K I/O address, M8047-HA jumper to 2-K (Also M8047-HB, -HC, -HD, -HE, -HF) M8048 MRV11-C Q Universal PROM/ROM module with sockets for 16 M8048 24-pin ROMs, up to 32-Kword (18-bit addressing M8048 only) M8048 Refs: MP-00871 M8049 DRV11-J Q Hi-density parallel line unit (4 lines x 16 bits) M8049 Refs: EK-DRV1J-UG, MP-00866, EB-20175-20, ZJ244-RZ M8049-AA DRV1J-SA/SF Q Modification of DRV11-J to DRV1J-SA/-SF M8049-AA Refs: EK-DRV1J-UG, MP-00866, EB-20175-20, ZJ244-RZ M8049-PA DRV1J-S Q M8049 for BA200 series M8049-PA Refs: EK-DRV1J-UG, MP-00866, EB-20175-20, ZJ244-RZ M8053 DMV11 Q Microprogrammed controller V.35, RS232/423, with M8053 space for ROM M8053 Refs: EK-DMV11-UG, EK-DMVQM-TM, MP-00942, ZJ328-RZ M8053 Refs: uNOTE N#041 M8053-AA DMV11 Q Microprogrammed controller (needs one of M5930- M8053-AA M5931) (Also M8053-AB, -AC, -ETC) M8053-AA Refs: EK-DMV11-UG, EK-DMVQM-TM, MP-00942, ZJ328-RZ M8053-AA Refs: uNOTE N#041 M8053-MA DMV11-A Q M8053 with DDCMP control ROM (point-to-point or M8053-MA multidrop) M8053-MA Refs: EK-DMV11-UG, EK-DMVQM-TM, MP-00942, ZJ328-RZ M8053-MA Refs: uNOTE N#041 M8053-PA DMV11 Q M8053 with S-box handle M8053-PA Refs: EK-DMV11-UG, EK-DMVQM-TM, MP-00942, ZJ328-RZ M8053-PA Refs: uNOTE N#041 M8059-FA MSV11-LF Q 64-Kword MOS RAM, single voltage M8059-FA (Also M8059-FC, -FF, -FH, -FJ, -FP, -FV) M8059-FA Refs: EK-MSV0L-UG, EK-MSV1L-CG, MP-01238, ZJ246-RZ M8059-KA MSV11-LK Q 128-Kword MOS RAM, single voltage M8059-KA (Also M8059-KC, -KF, -KH, -KJ, -KP, -KV) M8059-KA Refs: EK-MSV0L-UG, EK-MSV1L-CG, MP-01238, ZJ246-RZ M8061 RLV12 Q RL01/RL02 disk control M8061 Refs: EK-RLV12-UG, EK-RLV12-TD, MP-01282, ZJ285-RZ M8061 Refs: uNOTE N#041 M8063-AA KXT11-AA Q FALCON (SBC-11/21) single-board CPU with 2 SLU, M8063-AA 1 parallel line unit, line frequency clock, M8063-AA 16-Kbyte RAM (T11 processor) M8063-AA Refs: EK-KXT11-UG, EK-SBC11-UG, uNOTEs N#007, N#015 M8063-BA KXT11-BA Q FALCON (SBC-11/21) single-board CPU with 2 SLU, M8063-BA 1 parallel line unit, line frequency clock, M8063-BA 16-Kbyte RAM (T11 processor) M8063-BA Refs: EK-KXT11-UG, EK-SBC11-UG, uNOTEs N#007, N#015 M8064 DMV11 Q Microprogrammed controller, integral modem, space M8064 for ROM (single-line sync) M8064 Refs: EK-DMV11-UG, EK-DMVQM-TM, MP-00942, ZJ328-RZ M8064 Refs: uNOTE N#041 M8064-MA DMV11 Q M8064 with DDCMP point-to-point or multidrop, M8064-MA integral modem interface M8064-MA Refs: EK-DMV11-UG, EK-DMVQM-TM, MP-00942, ZJ328-RZ M8064-MA Refs: uNOTE N#041 M8067-FA MSV11-PF Q 128-Kbyte MOS memory with parity CSR M8067-FA (Also M8067-FB, -FC) M8067-FA Refs: EK-MSV0P-UG, MP-01239, ZJ246-RZ M8067-KA MSV11-PK Q 256-kbyte MOS memory with parity CSR M8067-KA (Also M8067-KC, -KE, -KF, -KH, -KJ, -KP, -KV) M8067-KA Refs: EK-MSV0P-UG, MP-01239, ZJ246-RZ M8067-LA MSV11-PL Q 512-Kbyte MOS memory with parity CSR M8067-LA (Also M8067-LC, -LF, -LH, -LJ, -LP, -LV) M8067-LA Refs: EK-MSV0P-UG, MP-01239, ZJ246-RZ M8080 ISV11-B Q DECdataway QBus Interface M8081 Q Image processing frame buffer prototype M8084 ISV11-B Q DECdataway Line Interface (Modem) M8085 ISV11-B Q DECDataway serial line interface M8086-YA LPV11 Q 2-channel LPV11 printer control for S-box M8087-PA Q Scanner/printer to Q-bus DMA interface M8088-AA ND50 Q ND50 memory controller for demand printing solution M8089-AA Q ND50 adapter ADLC to Q-bus data translation M8090 ICS11 U ICS11 master control M8094 ICR11 U ICR11 remote master control M8096 ICR11 U ICR11 remote slave control M8098 ICR11 U ICR11 remote modem control, 1 Megabaud M8100 U 11/45 data path module M8101 U 11/45 general register address module M8102 U 11/45 instruction register control module M8103 U 11/45 ROM address control module M8104 U 11/45 processor data and UNIBUS registers module M8105 U 11/45 timing and miscellaneous control module M8106 U 11/45 UNIBUS control module (Replaced by M8119) M8107 U 11/45 segmentation address paths module M8108 KT11-C U 11/45 segmentation status register module M8108-YA KT11-CD U 11/45 segmentation status register module M8109 U 11/45 timing generator module M8110 U 11/45 memory control for MOS memory M8111 U 11/45 1-Kword 16-bit bipolar memory M8111-YA U 11/45 1-Kword 18-bit bipolar memory M8112 U 11/45 floating point ROM control module M8113 U 11/45 floating point exponent data paths module M8114 U 11/45 fraction high order data path module M8115 U 11/45 fraction low order data path module M8116 U 11/45 segmentation jumper board M8119 U 11/45 UNIBUS control for FP11-C compatibility M8119 (Replaces M8106) M8120 U 11/45 memory control for bipolar memory M8121-YA MS11-AP U 4-Kword 18-bit bipolar memory M8123 KB11-C U 11/70 ROM & address control, FP11-C compatible M8124 RH70-C U 11/74 M8150 with expanded silo M8125 RH70-C U 11/74 M8153-YA new layout M8126 FP11-C U 11/70 fraction processor, high order M8127 FP11-C U 11/70 fraction processor, low order M8128 FP11-C U 11/70 floating point ROM control M8129 FP11-C U 11/70 fraction processor, exponent path M8130 KB11-C U 11/70 data paths module M8131 KB11-C U 11/70 general registers and ALU control M8132 KB11-C U 11/70 instruction register decode & condition M8132 codes M8132-YA KB11-C U 11/74 instruction register decode & condition M8132-YA codes modified to indicate full decode of ASRB M8133 KB11-C U 11/70 ROM & ROM control module M8134 KB11-C U 11/70 processor data & UNIBUS registers module M8135 KB11-C U 11/70 trap and miscellaneous control module M8136 KB11-C U 11/70 UNIBUS and console control module M8137 KB11-C U 11/70 system address path module M8138 KB11-C U 11/70 segmentation status register M8138 used with FP11-B M8138-YA KB11-C U 11/70 segmentation status register, M8138-YA used with FP11-C. M8139 KB11-C U 11/70 timing generator module M8140 KB11-C U 11/70 segmentation and console control module M8141 KB11-C U 11/70 mapping box M8142 KB11-C U 11/70 cache control board M8143 KB11-C U 11/70 cache address memory board M8144 KB11-C U 11/70 cache data memory M8145 KB11-C U 11/70 cache data path M8147 MJ11-A/B U 11/70 memory control and timing module M8147 (Replaces M8148) M8148 MJ11-A U 11/70 memory control and timing module M8148 (Replaced by M8147) M8149 MJ11 U 11/70 memory transceiver card M8150 RH70 U 11/70 MASSBUS data path module M8151 RH70 U 11/70 MASSBUS control and status module M8152 RH70 U 11/70 MASSBUS address and word count registers M8153 RH70 U 11/70 MASSBUS UNIBUS control M8153 (M8150-M8153 is option RH55 in an 11/55) M8153-YA RH70 U 11/70 M8153 with independent NED timeout for M8153-YA RH70-B (see M8125) M8154 RH70 U 11/70 MES, massbus controller M8156 RHS70-A U Data path module M8157 RHS70-A U DMA control module M8158 MK11 U Address buffer module M8159 MK11 U Data buffer module M8160 MK11 U Control A module M8161 MK11 U Control B module M8162 MK11 U Port MUX A module M8163 MK11 U Port MUX B module M8164 MK11/MKA11 U Data buffer module (Replaces M8159) M8165-YA KE74-A U 11/74 CCR, CISP control ROM logic card #1 M8165-YB KE74-A U 11/74 CCR, CISP control ROM logic card #2 M8166 KE74-A U 11/74 CCS, CISP control store M8167 KE74-A U 11/74 CDI, CISP decimal integral M8168 KE74-A U 11/74 DSC, CISP descriptor unit M8169 U 11/74 maintenance display and control M8177 KB11-CM U 11/74 system address path M8181 KB11-EM U 11/74 mapping box M8182 KB11-CM U 11/74 cache control board M8183 KB11-CM U 11/74 cache address memory board M8184 KB11-EM U 11/74 cache data memory M8185 KB11-EM U 11/74 cache data path M8185-YC KDF11-AC Q 11/23 CPU without options M8185-YC Refs: EK-KDF11-UG M8186 KDF11-A Q 11/23 CPU (Prior to etch rev. C, 18-bit M8186 addressing only. Caution, uses BC1, BD1, M8186 BE1, BF1 for purposes other than BDAL18-21) M8186 Refs: EB-18451-20, MP00734, EH-17898-20, EK-KDF11-UG M8186 Refs: EK-KDFAA-CG, ED-2136-20, ED-18325-53, uNOTEs N#006 M8186 Refs: N#017 M8186-YA KDF11-AA Q 11/23 CPU with KTF11-AA (MMU) and sockets for M8186-YA KEF11-AA (FP11) M8186-YA Refs: EB-18451-20, MP00734, EH-17898-20, EK-KDF11-UG M8186-YA Refs: EK-KDFAA-CG, ED-2136-20, ED-18325-53, uNOTEs N#006 M8186-YA Refs: N#017 M8186-YB KDF11-AB Q 11/23 CPU with KTF11-AA (MMU) and KEF11-AA (FP11) M8186-YB Refs: EB-18451-20, MP00734, EH-17898-20, EK-KDF11-UG M8186-YB Refs: EK-KDFAA-CG, ED-2136-20, ED-18325-53, uNOTEs N#006 M8186-YB Refs: N#017 M8186-YC KDF11-AC Q 11/23 CPU without options M8186-YC Refs: EB-18451-20, MP00734, EH-17898-20, EK-KDF11-UG M8186-YC Refs: EK-KDFAA-CG, ED-2136-20, ED-18325-53, uNOTEs N#006 M8186-YC Refs: N#017 M8188 FPF11 Q Floating point processor for PDP-11/23[+], (11/24?) M8188 Refs: EK-FPF11-TM, MP-01285 M8189 KDF11-BA Q 11/23-PLUS single-board CPU M8189 Refs: EK-KDFEB-UG, MP-01236, uNOTE N#015 M8190 KDJ11-B U 11/84 CPU: J11 CPU 15MHz with unusable socket for M8190 FPJ11 and 2 SLUs, boot & diagnostic ROMs, 3 ROM M8190 sockets, 8-Kbyte cache. M8190 Refs: EK-KDJ1B-UG, uNOTE N#039 M8190-AB KDJ11-BB Q J11 CPU 15MHz with 2 boot & diagnostic ROMs M8190-AB FPJ11 compatibility (warm floating point, but M8190-AB will accept FPA) M8190-AB Refs: EK-KDJ1B-UG, uNOTE N#039 M8190-AC KDJ11-BD Q J11 CPU 15MHz with 2 boot & diagnostic ROMs, M8190-AC FPJ11-AA M8190-AC Refs: EK-KDJ1B-UG, uNOTE N#039 M8190-AD KDJ11-BA Q J11 CPU 18MHz with 2 boot & diagnostic ROMs M8190-AD FPJ11 compatibility (warm floating point, but M8190-AD will accept FPA) M8190-AD Refs: EK-KDJ1B-UG, uNOTE N#039 M8190-AE KDJ11-BF Q/U 11/83-84 CPU J11 CPU 18MHz with 2 boot & M8190-AE diagnostic ROMs, FPJ11-AA. M8190-AE Refs: EK-KDJ1B-UG, uNOTE N#025, N#030, N#035, N#039 M8191 KTJ11-B U 11/84 UNIBUS PMI controller (contains 4 optional M8191 boot ROM sockets (M9312 compatible)). M8192 KDJ11-AA Q LSI-11/73 CPU, 8-Kbyte cache, not FPJ11-AA M8192 compatibile (but can be upgraded) M8192 Refs: EK-KDJ1A-UG, uNOTEs N#006, N#008, N#009, N#011 M8192 Refs: N#025, N#039 M8192-YB KDJ11-AB Q LSI-11/73 CPU, 8-Kbyte cache, FPJ11-AA compatible. M8192-YB Refs: EK-KDJ1A-UG, uNOTEs N#006, N#008, N#009, N#011, N#040 M8192-YC KDJ11-AC Q LSI-11/73 CPU, 8-Kbyte cache, FPJ11-AA installed. M8192-YC Refs: EK-KDJ1A-UG, uNOTEs N#006, N#008, N#009, N#011, N#040 M8194 KDF11 Q Data memory module M8195 KDF11 Q Cache data path module M820 KA11 U 11/20 data path control module M8200 DMC11 U 1-line sync DDCMP DMA, microprocessor board M8200 (Space for 1K ROM) M8200 Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM M8200-YA DMC11-R U 1-line sync DDCMP microprocessor with 1K control M8200-YA ROM (point-to-point, used with M8201). M8200-YA Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM M8200-YB DMC11-AL U 1-line sync DDCMP microprocessor with 1K control M8200-YB ROM (point-to-point slave, used with M8202). M8200-YB Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM M8200-YC DMC11 U 1-line sync DDCMP microprocessor with 1K control M8200-YC ROM for LPA11. M8200-YC Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM M8201 DMC11 U 1-line sync DDCMP DMA, EIA & V35 line board M8201 Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM M8202 DMC11 U 1-line sync DDCMP DMA, coax line board M8202 Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM M8202-YA DMC11-MA U 1Mbps integral modem line unit M8202-YA Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM M8202-YB DMC11 U 500-Kbaud integral modem line unit M8202-YB Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM M8202-YC DMC11 U 250-Kbaud integral modem line unit M8202-YC Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM M8202-YD DMC11-MD U 56Kps integral modem line unit M8202-YD Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM M8202-YE ISB11-A U Multi-drop 56-Kbaud integral modem line unit M8203 DMP11 U Line unit, RS-449, integral modem M8204 KMC11-A U Microprocessor, DMC11 code, 1K RAM programme space M8206 DMC11 U Microprocessor, DMC11 code, 4K RAM programme space M8206 Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM M8207 DMC11 U Microcontroller with space for ROM M8207 Refs: EK-DMCMP-TM, EP-DMCMP-TM, MP-00076, EK-DMCLU-MM M8207-RA DMR11 U Microprocessor based sync communication M8207-RA controller, implements DDCMP protocol. M8207-RA Refs: EK-DMR11-TM, EP-DMR11-TM, MP-00911, EK-M8207-TM M8207-RA Refs: EK-M8203-TM M8207-YA DMP11 U Microprocessor with DDCMP control ROM M8207-YA (point-to-point or multidrop, used with M8203) M8207-YA Refs: EK-DMR11-TM, EP-DMR11-TM, MP-00911, EK-M8207-TM M8207-YA Refs: EK-M8203-TM M8208 VT1X3-MM Q Maintenance Module for 11MDS system (VT103) M8208 (to be installed in specially-wired slot) M821 KA11 U 11/20 register control module M8217 DW11-A U UNIBUS to Qbus interface module M822 KA11 U 11/20 flag control module M823 KA11 U 11/20 codes data module M8238 KU780-A 2K WCS M824 KA11 U 11/20 priority module M825 KA11 U 11/20 power failure and control module M8254 DA11-KA U Interprocessor buffer M8255 KY11-R,RC U Unibus serial console micro control M8255-01 KY11-RE U Unibus serial european console micro control M8256 RX211 U RX02 floppy disk controller M826 U 75 to 250-ns clock with SR (8-phase clock) M8264 KD11-D/E U 11/34 No sack time-out (needed for KD11-D, KD11-E) M8265 KD11-EA U 11/34A data paths module (Replaces M7265) M8266 KD11-EA U 11/34A control module (Replaces M7266) M8267 FP11-A U 11/34A floating point processor M8267-TA FP11-A U Test module for M8267 M8268 KK11-A U 11/34 cache module M827 KE11-A U Clock and states M829 CR-11 U CR-11/CM-11 card reader controller M829 (Requires M105 and M782 or M7820 or M7821) M8290 CR-11 U CR-11/CM-11 card reader controller M8290-YA CR-11 U CR-11/CM-11 card reader controller w/filter M8290-YA on input strobe for use w/EMI cable M8291 CR-11 U CR-11/CM-11 card reader controller M8293 U 16 K UNIBUS timing M8294 MM11-W/-WP U 32K timing and UNIBUS interface M8295 VT30-H U RGB graphics memory board M8377 KXT11-CA Q T11 16-bit single-board computer. M8377 32-Kbytes of static RAM, two 28-pin M8377 sockets for up to 32-Kbytes of user ROM M8377 or static RAM. 20 lines of parallel I/O, M8377 three programmable SLUs - one async console line, M8377 and two sync/async (one with modem control) M8377 with rates up to 76.8-Kbaud. M8377 Two channels of DMA, three programmable M8377 interval timers. System line time clock and M8377 Onboard diagnostic with LED indicators. M8377 Can operate as either a single-line board M8377 computer, or as a peripheral processor. M8377 (As a peripheral processor, up to 14 M8377 KXT11-CAs may be configured on a single M8377 Qbus with a host processor such as the M8377 KDJ11 or KDF11. This product is fully M8377 supported by MicroPower/Pascal and M8377 associated tool kits.) M8377 Refs: EK-KXTCA-UG, EK-KXTCA-HR, AA-Y615A-TK, AA-AU63A-TC M8377 Refs: AA-AU64A-TC, uNOTEs N#016, N#018, N#032, N#034 M8392-AA Q 68020, 1-Mbyte, 2 x 8-channel UARTs M8392-BA Q 68020, 1-Mbyte, 2 x 8-channel UARTs M8392-BA with S-box handle M8396 DMF32 U 8 async lines, only lines 0 and 1 have M8396 split speed capability and full modem M8396 control. DMA or silo mode. 50 to 19.2K. 1 M8396 sync line up to 19.2K, 1 line printer M8396 interface or 1 parallel interface. M8398 DMZ32 U 24-line async interface, up to 19.2K. M8398 Optional remote communication panel. DMA mode. M8578 MRV11-D Q PROM/ROM module with 16 sockets; 24/28-pin devices M8578 including 8K by 8 static RAMs, and 32K by 8 chips M8578 for a maximum of 512K-bytes of 22-bit addressing. M8578 Requires MXV11-B2 bootstrap ROM for bootstrapping M8578 capability. Q22. M8578 Refs: EK-MRV1D-UG, MP-01602, uNOTE N#003 M8586 U LP20 control M8587 U LP20 data path M8631-AA MCV11-DA Q 4-Kword 16-bit 2K x 8 static CMOS RAM with 96-hour M8631-AA battery backup (Also M8631-AF, -AL). Q22. M8631-AA Refs: EK-MCV1D-UG, EK-MCV1D-RC, MP-01309 M8631-CA MCV11-DC Q 16-Kword 16-bit 2k x 8 static CMOS RAM with 96-hour M8631-CA battery backup (Also M8631-CF, -CL). Q22. M8631-CA Refs: EK-MCV1D-UG, EK-MCV1D-RC, MP-01309 M8634 IEQ11-A Q DMA version of IEEE(GPIB) interface M8634 Refs: EK-IEUQ1-UG, MP-01180, ZJ361-RZ, EY-1064E-PO M8634-PA IEQ11-S Q Communications Controller (IEC/IEEE) M8634-PA (for BA200 series) M8634-PA Refs: EK-IEUQ1-UG M8636 KWV11-W Q Watchdog Timer, 5 in, 2 out, optical isolation M8637-BA MSV11-JB Q 1-Mbyte ECC PMI RAM with CSR. Q22. M8637-BA (Also M8637-BC, -BF, -BH, -BL, -BP) M8637-BA Refs: EK-MSV1J-UG, MP-02056, uNOTEs N#028, N#030 M8637-CA MSV11-JC Q 2-Mbyte ECC PMI RAM with CSR, Q22. M8637-CA (Also M8637-CC, -CF, -CH, -CL, -CP) M8637-CA Refs: EK-MSV1J-UG, MP-02056, uNOTEs N#028, N#030 M8637-DA MSV11-JD Q 1-Mbyte ECC RAM. M8637-DA (Also M8637-DC, -DE, -DF, -DH, -DL, -DP, -DT, -DV) M8637-DA Refs: EK-MSV1J-UG, MP-02056, uNOTEs N#028, N#030 M8637-EA MSV11-JE Q 2-Mbyte ECC RAM. M8637-EA (Also M8637-EC, -EE, -EF, -EH, -EL, -EP, -ET, -EV) M8637-EA Refs: EK-MSV1J-UG, MP-02056, uNOTEs N#028, N#030 M8638 Q HDLC DMA single channel sync MUX controller M8639 RQDX1 Q RD51/52 & RX50 MFM Disk control module M8639 (Needs microcode rev 9.0 code ROMs for RD52) M8639 (Must be final device in bus) M8639 Refs: EK-RQDX1-UG, MP-01731, uNOTE N#043 M8639-YA RQDX1 Q RD51/52 & RX50 MFM Disk control module M8639-YA (Must be final device in bus) M8639-YA Refs: EK-RQDX1-UG, MP-01731, uNOTE N#043 M8639-YB RQDX2 Q RD51/52 & RX50 MFM Disk control module, can M8639-YB be expanded (must be final DMA device in bus) M8639-YB Refs: EK-RQDX2-UG, MP-01731, uNOTE N#043 M8659 Q LSI-11 Bus Grant card (VT71 Grant Card) M8687 U RM05 Drive interface M8716 DR11-W U General purpose DMA parallel interface M8716 (DR11-B hex) M8717 U Interprocessor interrupt and sanity timer M8718 U Modem control, 16-lines (CTS & RTS) M8719 IP112 D UNIBUS to D-BUS cable (I/O daisy chain bus) M8719 control and interface M8720-YA MSS11-KA U 4-Kword 18-bit MOS RAM M8720-YB MSS11-KB U 8-Kword 18-bit MOS RAM M8720-YC MSS11-KC U 12-Kword 18-bit MOS RAM M8720-YD MSS11-KD U 16-Kword 18-bit MOS RAM M8720-YE MSS11-KE U 4-Kword 18-bit static MOS RAM M8720-YF MSS11-KF U 8-Kword 18-bit static MOS RAM M8720-YH MSS11-KH U 12-Kword 18-bit static MOS RAM M8720-YJ MSS11-KJ U 16-Kword 18-bit static MOS RAM M8721-YA U UNIBUS repeater M8721-YB DT07 U Isolated loopversion DT07 port module M8721-YC DT07 U DT07 switched UNIBUS repeater M8721-YD DT07 U Port terminated DT07 port module M8722-AH MS11-MA U 128-Kbyte MOS ECC memory (11/44, 11/24) M8722-AH (Also M8722-AN) M8722-BA MS11-MB U 256-Kbyte MOS ECC memory (11/44, 11/24) M8722-BA (Also M8722-BB, -BC, -BD, -BF, -BH, -BJ, -BK, -BL, M8722-BA -BM, -BN) M8728-AA MK11 U 64-Kword 39-bit MOS memory array (11/70, 11/750) M8728-AA (Also M8728-AB, -AC, -AD, -AE, -AF, -AH, -AK, -AM, M8728-AA -AN) M8728-CM MK11 U 16-Kword 39-bit MOS memory array (11/70) M8728-CM (Also M8728-CN) M873 U UNIBUS restart with space for 4 ROMs (256 x 4) M8730 KW11-C U Calendar and clock module M8730-YA KW11-C U Calendar and clock module with more features M8739 KLESI-UA U LESI-to-UNIBUS interface for RC25, TU81 M8743-AA MDECS-AA U 512-Kbyte ECC RAM M8743-AA (Also M8743-AB, -AC, -AD, -AE, -AF, -AH, -AJ, -AK, M8743-AA -AL, -AM, -AN, -AP, -AV) M8743-BA MS11-PB U 1-Mbyte ECC RAM M8743-BA (Also M8743-BB, -BC, -BD, -BE, -BF, -BH, -BJ, -BK, M8743-BA -BL, -BM, -BN, -BP, -BV) M8750 - VAX-11/750 1Mbyte MOS memory assembly M8750 Refs: MP-01398 M8901 - TU16 data synchronizer, replaced by M8901-YB M8901-YA - TM02-FE data synchronizer for 75 IPS drive, M8901-YA replaced by M8901-YC M8901-YB - TU16 data synchronizer, replaces M8901 M8901-YC TM02-FE U Data synchronizer for 75 IPS drive M8901-YC (Replaces M8901-YA, -YC) M8901-YD TM03-AB U Data synchronizer for 125 IPS drive M8902 TM02-FA U TM02 tape control, PE (also TM02-FB, -FC, -FD) M8902-YA TM02-FE U M8902 for 75 IPS drive (also TM02-FF, -FH, -FJ) M8903 TM02-FA U TM02 tape control, common mode M8903 (also TM02-FB, -FC, -FD) M8903-YA TM02-FE U M8903 for 75 IPS drive (also TM02-FF, -FH, -FJ) M8904 TM02-FA U TM02 tape control, NRZI (also TM02-FB, -FC, -FD) M8904-YA TM02-FE U TU45 M8904 (also TM02-FF, -FH, -FJ) M8905 TM02-FA U TM02 maintenance register (also TM02-FB, -FC, -FD) M8905-YA TM02-FE U TM02-FE M8905 for 75 IPS drive M8905-YB TM03 U TM03 M8905 M8906 TM02 U TM02 16-bit fiddler M8908-YA TM03 U TM03 MASSBUS interface (replaces M8908) M8909 TM02 U TM02 MASSBUS interface (replaced by M8909-YA) M8909-YA TM02/03 U TM02/03 MASSBUS interface (replaces M8909) M8911 - TU16 (TM02) slave clock, motion delay, replaced M8911 by M8931 on TE16 M8912 - TE16 slave test function generator M8913 TM03 U Data driver M8913 2 H854, 10 lines driven from board, 20 lines M8913 brought out, TU16 (from O/M list) M8913-YA TM03 U Data driver M8913-YA M8913 with terminator resistors, TU16 M8913-YA (from O/M list) M8916 TU16-W - logic and write board M8928 TM03 U TU45 magtape adapter for Pertec 9000 M8928 (replaces M8921, M8928) M8931 - TU16 (TM02 & TM03) slave clock, motion delay M8931 replaces 8911 M8932 TM03 - tape control M8933 TM03 U tape control common mode M8934 TM03 U tape control NRZI M8937 TM03 - TM03, control and write drivers M8981-AA KDJ11-EA Q/U 11/93-94 CPU 18MHz, DCJ11, FPJ11, 2-Mbyte parity M8981-AA RAM, 8 async SLUs, boot/diagnostic ROM M8981-AA Refs: EK-26921-00 (DCJ11), uNOTE N#040 M8981-BA KDJ11-EB Q/U 11/93-94 CPU 18MHz, DCJ11, FPJ11, 4-Mbyte parity M8981-BA RAM, 8 async SLUs, boot/diagnostic ROM M8981-BA Refs: EK-26921-00 (DCJ11), uNOTE N#040 M9001 - Bus connector M9001-YA TE16 - M9001 with 8 lines grounded M9001-YB TE16 - M9001 terminated M9001-YC TE16 - M9001-YA terminated M9014 U UNIBUS to 3 H854s M9015 U 3 H854s to UNIBUS M9031 U UNIBUS to 3 3M cables for 11/74 M9037 Q Grant continuity M9039 U TE16 terminator M9039 (will replace M9001 series & M8913) M9047 Q Grant continuity (also M9047-SA, -SF) M9058 Q Distribution/adapter/buffer board for RQDX1/2/3 M9058 to four drives and switch panels, fits BA23/124. M9061-AA U 11/84 AC/DC reboot sequencer M920 U UNIBUS connector M9202 U UNIBUS connector, inverted (M9192+M9292 assembled M9202 1" apart with 2' cable) M930 U Terminator for PDP11 bus, 120-ohm to +3V, 1000pf M930 on BF1 & BF2 M9300 U UNIBUS B terminator (M930 with NPR logic) M9301 U UNIBUS terminator with space for 512-word ROM M9301 bootstrap (slots A & B in hex SPC; addresses: M9301 765000, 773000) M9301 Refs: EK-M9301-TM M9301-SA U M9301 with Western Electric bootstrap M9301-SA Refs: EK-M9301-TM M9301-SB U M9301 with Chase bootstrap (M9301-YA + 2nd RP04) M9301-SB Refs: EK-M9301-TM M9301-SC U M9301 with Chase bootstrap (M9301-YC + 2nd RK11) M9301-SC Refs: EK-M9301-TM M9301-SD U M9301 with SEDM bootstrap for WECO M9301-SD Refs: EK-M9301-TM M9301-SE U M9301 with Canada Post Office bootstrap M9301-SE Refs: EK-M9301-TM M9301-SF U M9301 with DA11 bootstrap M9301-SF Refs: EK-M9301-TM M9301-SH U M9301-YC modified for RX11 M9301-SH Refs: EK-M9301-TM M9301-SJ U M9301-YA + RF11 boot (WECO) M9301-SJ Refs: EK-M9301-TM M9301-SK U Boot for DMC11, RX01, TU10, DL11, PTR, ASCII, M9301-SK diagnostics M9301-SK Refs: EK-M9301-TM M9301-SL U M9301-SE with no remote switch panel M9301-SL Refs: EK-M9301-TM M9301-SV U M9301 with DQ11-DA DECnet loader, RK, RX, TMA11 M9301-SV boots M9301-SV Refs: EK-M9301-TM M9301-SW U M9301-SF updated with DA11 DECnet 2 bootstrap M9301-SW Refs: EK-M9301-TM M9301-SX U M9301 with DA11 DECnet 2 loader M9301-SX Refs: EK-M9301-TM M9301-SY U M9301 with DMC11 DECnet & TJE16 loader M9301-SY Refs: EK-M9301-TM M9301-WA U M9301 with 765000 & 766000 addresses, DN87S SMP M9301-WA boot (TOPS-10) M9301-WA Refs: EK-M9301-TM M9301-WB U M9301-WA except DN20-CC, -CD SMP boot (TOPS-10) M9301-WB Refs: EK-M9301-TM M9301-YC U M9301 with 11/70 bootstrap M9301-YC Refs: EK-M9301-TM M9301-YD U M9301 with DDCMP bootstrap M9301-YD Refs: EK-M9301-TM M9301-YE U M9301 with bootstrap for DECnet, DL11-E, DU11, M9301-YE DUP11, low speed PTR, ASCII console M9301-YE Refs: EK-M9301-TM M9301-YF U M9301 with boot for PC11, RP02-6, RS03-4, RK05-6, M9301-YF RX01, TU10, TU16, TU56, TS03, TTY, ASCII console, M9301-YF diagnostics M9301-YF Refs: EK-M9301-TM M9301-YH U M9301 with 11/60 bootstrap (works with 11/70) M9301-YH Refs: EK-M9301-TM M9301-YJ U M9301 with bootstrap for DECnet DMC11, RX01, TU10, M9301-YJ ASCII console M9301-YJ Refs: EK-M9301-TM M9301-YL U M9301 with Olivetti bootstrap M9301-YL Refs: EK-M9301-TM M9302 U 11/04 UNIBUS terminator, far end M9302 (Fits in any Standard UNIBUS slot, terminating all M9302 newer UNIBUS machines.) M9302-YA U M9302 with different resistors for minimum UNIBUS M9302-YA levels M9302-YB U M9302 card used to mount an overtemperature relay M9303 U M930 with individual +5V for each terminator (used M9303 with 2347 UNIBUS tester) M9303-YA U M9303 + M9307 wired together with 1" spacers. M9303-YA (used with 2347 UNIBUS tester) M9304 U Long M930 for low margin testing M9304-YA U Long M930 for high margin testing M9305 U M981 for low margin testing M9305 U M981 for high margin testing M9306 U 11/04 near end UNIBUS terminator, no boot M9306-YB U M9306 with different resistors to give a minimum M9306-YB UNIBUS level when put in parallel with another M9306-YB terminator. M9307 U M919 for 2 40-conductor 3M cable M9308 U Single-ended margin head (UNIBUS terminator with M9308 sack turn-around logic) M9309 U Long M930 M9311 U M9301 with 766000 and 763000 addresses and GT62 M9311 comm boot loader. M9312 U Bootstrap terminator with 5 empty ROM sockets; one M9312 for CPU diagnostics, 4 for peripheral boots M9312 Refs: EK-M9312-TM M9312-YA U M9312 revision C or later for 11/74 M9312-YA Refs: EK-M9312-TM M9313 U UNIBUS exercisor + terminator (UET) M9400 REV11 Q Terminator, DMA refresh, bootstrap (bootstrap for M9400 use with KD11-F and KD11-HA processors only. M9400 Termination for 18-bits only. M9400 DMA refresh may be used in any system.) M9400-YA REV11-A Q 120-ohm terminators with refresh & floppy boot M9400-YA Refs: MP-00073, EB-20175-20, uNOTE N#035 M9400-YB TEV11 Q 120-ohm terminators M9400-YB Refs: MP-00073, EB-20175-20, uNOTE N#035 M9400-YC REV11-C Q Refresh and boot alone M9400-YC Refs: MP-00073, EB-20175-20, uNOTE N#035 M9400-YD REV11-D Q Headers alone, no terminators, Cable M9400-YD connector (18-bit bus only). M9400-YD BCV1A-XX = M9400-YD + M9401 + 2 x BC05L-XX cable M9400-YE REV11-E Q Headers and 240-ohm terminators (18-bit bus only) M9400-YE (can be used with M9401 as a Qbus extender) M9400-YE BCV1B-XX = M9400-YE + M9401 + 2 x BC05L-XX cable M9400-YE Refs: uNOTE N#035 M9400-YF REV11-F Q M9400-YA with boot sockets with no ROMs M9400-YF Refs: uNOTE N#035 M9400-YH REV11-H Q LDP/COMM boot & floppy boot with terminators M9400-YH Refs: MP-00331, (MP-00074 ?), EB-20175-20, uNOTE N#035 M9400-YJ REV11-J Q DMA refresh bootstrap, cable connector, 250-ohm M9400-YJ terminator M9400-YJ Refs: uNOTE N#035 M9400-YK REV11-K Q M9400-YH with no terminators M9400-YL REV11-L Q M9400-YH with cable connectors M9400-YL Refs: uNOTE N#035 M9400-YM REV11-M Q Refresh with DECnet bootstrap M9400-YN REV11-N Q RX02 boot and refresh M9401 Q Mirror-image connector used at other end of cable M9401 to M9400 to join 2 backplanes. 18-bit bus only, M9401 No terminators. M9401 BCV1A-XX = M9400-YD + M9401 + 2 x BC05L-XX cable M9401 BCV1B-XX = M9400-YE + M9401 + 2 x BC05L-XX cable M9404[-00] Q 1st Q22 bus cable connector, no terminators M9404[-00] Used at end of cable nearest cpu. M9404[-00] Refs: uNOTE N#035 M9404-YA Q Cable connector for expansion box, with 240-Ohm M9404-YA terminators. Used at end of cable nearest to CPU. M9404-YA BCV2C-XX = M9404-YA + M9405 + 2 x BC02D-XX cable M9404-YA Refs: uNOTE N#035 M9405 Q 2nd Q22 bus cable connector, no terminators, M9405 mirror image. Used at end of cable furthest from M9405 CPU. M9405 BCV2B-XX = M9404-00 + M9405-00 + 2 x BC02D-XX cable M9405 Refs: uNOTE N#035 M9405-YA Q M9405 with 120-Ohm terminators. Used at end of M9405-YA cable furthest from CPU. M9405-YA BCV2A-XX = M9404-00 + M9405-YA + 2 x BC02D-XX cable M9405-YA Refs: uNOTE N#035 M9405-YD Q M9405 with no terminators. Used at end of cable M9405-YD furthest from cpu M9405-YD Refs: uNOTE N#035 M9405-YE Q M9405 with 240-Ohm terminators. Used at end of M9405-YE cable furthest from cpu M9405-YE Refs: uNOTE N#035 M971 - H854 mounted on single card, accepts BC08R M974 - Test Connector (DH11) M9713-AA U 11/94 +5V and -15V minimum load module for KDJ11-E M9715 ? 'paddle' board, connects to KA660 M992-YB U Bootstrap diode matrix M9970 U M997, H854 Facing Edge (11/05) W9301 U Quad-height hi-density wire wrappable module W9301 Used for customer-designed and built boards. W9302 U Hex-height hi-density wire wrappable module W940 U Quad-height wire wrappable module, W940 space for 50 14/16-pin ICs W941 U Dual-height wire wrappable module, W941 space for 25 14/16-pin ICs W942 U W940 with IC sockets W943 U W941 with IC sockets W950 U Quad-height wire wrappable module, W950 space for 30 14/16-pin and 8 24-pin ICs W951 U Dual-height wire wrappable module, W951 space for 15 14/16-pin and 4 24-pin ICs W9511 Q Quad-height wire wrap module, no sockets W9512 Q Dual-height wire wrap module, no sockets W9513 Q W9511 with 58 pre-mounted DIP sockets W9514 Q W9511 with 58 pre-mounted DIP sockets W9515 Q W9512 with 25 pre-mounted DIP sockets W952 U W950 with IC sockets W953 U W951 with IC sockets W960 U Single-height blank module with space for W960 2 14/16-pin ICs or 1 24-pin IC W964 U Blank terminator board W968 U Quad-height blank module with space for W968 72 14/16-pin ICs W969 U Dual-height blank module with space for 36 W969 14/16-pin ICs W970 U Single-height blank module W971 U Dual-height blank module W972 U Single-height blank module, copper clad W9720 U Single-height blank module, copper clad W9721 U Dual-height blank module, copper clad W9722 U Quad-height blank module, copper clad W973 U Dual-height blank module, copper clad W974 U Single-height blank module, perforated W975 U Dual-height blank module, perforated W979 U Dual-height blank module with space for W979 18 14/16-pin ICs W982 U Single-height module extender W984 U Dual-height module extender W987 U Quad-height module extender W990 U Single-height bare board, split lug terminals W991 U Dual-height bare board, split lug terminals W992 U Single-height blank module, copper clad W993 U Dual-height blank module, copper clad W998 U Single-height blank module, perforated W999 U Dual-height blank module, perforated BB11 BB11 U 4-slot blank mounting panel (backplane with UNIBUS BB11 and power lines only) DD11-A DD11-A U UNIBUS Backplane with 4 SPC slots DD11-B DD11-B U UNIBUS Backplane with 4 SPC and 2 DF11 slots DD11-C DD11-C U UNIBUS Backplane with 4 SPC slots DD11-D DD11-D U UNIBUS Backplane with 9 SPC slots DD11-PK DD11-PK U 9-Slot backplane for 11/04,34,34a DDV11-B DDV11-B Q 6 x 9 Qbus backplane, Q18 DLV11-K DLV11-K - EIA to 20mA controller DLV11-K (-KA, -KB) DLV11-K Refs: EK-DLVKA-IN, MP-00694, EB-20175-20, uNOTE N#033 KXT11-LP KXT11-LP - Active Loopback connector (for use with KXT11-A) RLV11 RLV11 Q RL01/02 disk controller option, consists of RLV11 modules M8013 and M8014. Q/CD-only option. RLV11 18-bit DMA only. Caution: uses BC1 and BD1 RLV11 for purposes other than BDAL18 and BDAL19 RLV11 Refs: EK-RLV11-TD, MP-00635, EB-20175-20 VSV11 VSV11 Q Raster Graphics option, consists of modules VSV11 M7061, M7062 and M7064. Q/CD-only option. VSV11 Refs: EK-VSVFQ-UG, MP-01012, EK-VT101-TM ##### T H I R D P A R T Y O P T I O N L I S T ------------------------------------------------------------------------------ MODULE OPTION BUS DESCRIPTION ------ -------- --- -------------------------------------------------- 306A Q Grant Technology clock/calendar 307 Q Grant Technology clock/calendar 440 Q Data Systems Design (DSD) disk controller. Emulates RXV21. 880 Q Data Systems Design (DSD) disk controller. Emulates Digital RLV12 and RXV21. Has on-board boot code. ACT DH/DM U Able Comput Technology 16 async communication line controller with modem control. All standard DH11 baud rates, plus 19.2-Kbaud. Emulates DEC DH11+DM11. ADC-01 U Ampex controller for up to two SMD disks. Limited to drives with low data rates and requires a custom driver. B01076 Q Baydel multi-function board B01079-4 Q Baydel cartridge tage controller BRX-50 Q Baydel 5.25" floppy disk controller Buslink/Uni U Able Computer interprocessor communications board, emulates DA11 Buslink/Q Q Able Computer interprocessor communications board, emulates DA11 CQ1610 Q Dilog 16-line RS-232 communications controller. Emulates DH11 CQ1620 Q Dilog 8-line RS-232 communications controller. Emulates DHV11 CQ1622 Q Dilog 8-line RS-422 communications controller CQ1640 Q Dilog 16-line RS-232 communications controller CS01/H Q Emulex 16-64 line RS-422 communications controller. Emulates 2-8 DHV11 CS02/H Q Emulex 16-line RS-422 communications controller. Emulates 1 DH11 or 2 DHV11 CS04 Q Emulex 16-64-line RS-232/422 communications controller. Emulates 2-8 DHV11s CS08 Q Emulex 8-line RS-232 communications controller. Emulates DHV11. CS09 Q Emulex 16-line RS-232 communications controller. Emulates 2 DH11 CS11 U Emulex 16-64 line RS-422 communications controller. Emulates DH11, DMF32 or DV11 CS11/F U Emulex communications controller, 8-line RS-422 + 1 synch + 1 parallel. Emulates DMF32 CS11/H U Emulex 16-64 line RS-232 communications controller. Emulates DH11? CS11/U U Emulex 32-line synchronous/asynchronous communications controller. Emulates DU11? CS11/V U Emulex 32-line synchronous/asynchronous communications controller. Emulates DV11 CS21/H U Emulex 16-line RS-232 communications controller. Emulates DH11 CS21/U U Emulex 16-line RS-232 communications controller Emulates DU11? CS21/Z U Emulex 16-line RS-232 communications controller. Emulates DZ11-E CS23 U Emulex 12-32-line RS-232 communications controller. Emulates DHU11 CS32/F U Emulex 16-128-line RS-232 communications controller. Emulates DMF32 CTS11 Q Baydel QIC 2 .25" DC600A/DC300XL tape cartridge drive controller. Registers are similar, but not identical, to TSV05 CU1710 U Dilog asynchronous communications controller. 16 Channels with modem control, emulates DHU11 DC7711 Q Fisher-Rosemount Provox process control system Highway II interface (DHI) 706131 DCV51 - Plessey disk controller for 1-4 MFM drives. 706131 Supports ST251. DH6215-DH1 Q Fisher-Rosemount Provox process control system Data Highway interface DHU/HS U Able Computer 16-port async RS-232 communications board. Emulates DHU-11 Dual I/O U Able Computer general purpose parallel interface Emulates 2 x DR11-C DV/16 U Able Computer 16-port sync/async DMA communications multiplexor with support for ADCCP, Bisync, DDCMP. Emulates DV11 DZ/16 U Able Computer 16-port async multiplexor. Emulates 2 x DZ11 DM01 Q Emulex ST506/ST412 disk controller. Emulates RQDXn, SA540 5.25" floppy disk interface emulates RX50. 22-bit bus. DM02 Q Emulex ESDI disk controller. Emulates RQDXn, SA540 5.25" floppy disk interface emulates RX50. 22-bit bus. DQ100 Q Dilog disk controller emulating Digital RK05 (supports Diablo 31) DQ120 Q Dilog DU120 tape controller DQ130 Q Dilog DU120 tape controller. Emulates TM11. 4 Drives. Pertec I/O DQ132 Q TS-11 emulation for Pertec formatted tape, up to 4 drives. Q22. Dilog. Replaced by DQ142. DQ142 Q Dilog .5" reel-to-reel tape drive controller for TU80 and CDC 92185. Emulates TS11. Replaced (with restrictions) by DQ152 DQ152 Q Dilog .5" reel-to-reel tape drive controller Pertec I/O DQ153 Q TMSCP emulation for Pertec formatted tape, up to 4 drives, LSI-11 boot, LSI-11 & VAX config programme & diagnostics in ROM, NVRAM config settings. Q22. Dilog. DQ200 Q Dilog disk controller. Emulates extended RK11/RK05 (supports CDC 9448-96) DQ202A Q Dilog disk controller. Emulates RP11/RP02/03 (Supports CDC 9715-160 and Fujitsu 2284) DQ215 Q Dilog disk controller. Emulates RK711/RK07 (Supports CDC 9715-160) DQ235 Q Dilog disk controller. Emulates RK611/RK06 (supports SSM 096) DQ236 Q Dilog 4 x SMD 20Mhz disk controller. Replaced by DQ256. DQ246 Q Dilog 4 x SMD/ESMD disk controller. Emulates MSCP. (Supports Fujitsu 2333). Replaced by DQ256. DQ256 Q Dilog 24 Mhz SMD disk controller, Emulates MSCP, 4 drives. Replaces DQ246 DQ302 Q Dilog QIC-02 .25" cartridge tape drive interface Emulates TM11. DQ322 Q Dilog QIC-02 .25" cartridge tape controller, Emulates TM11 DQ3256 Q Dilog 24 MHz SMD disk controller. Emulates MSCP. BA4000 DQ330 Q Dilog Kennedy 6450 cartridge tape controller DQ3686 Q Dilog 20 MHz ESDI & SA450 disk controller. Emulates MSCP. BA4000. Replaced by MQ3686 DQ409 Q Dilog 8" DSDD floppy disk controller DQ419 Q Dilog floppy disk controller, SA850, Emulates RX01/RX02 DQ606 Q Dilog floppy disk controller, SA450, Emulates RX33/50 DQ614 Q Dilog ST-506/412 emulation of four RL01/02 DQ616 Q Dilog 4 x ST506/ST412 (MFM) disk controller for uVAX Emulates MSCP. Replaced by MQ606. DQ619 Q Dilog floppy disk drive controller. Emulates RXV21/RX02. Shugart SA450 compatible, DSD or Dilog media compatible, supports two drives. 22-bit addresssing capability DQ686 Q Dilog 4 x ESDI disk controller. Emulates MSCP. Replaced (with restrictions) by DQ696. DQ696 Q Dilog 2 x ESDI disk controller. Emulates MSCP. (supports Fujitsu 2333) DR-216 Q Dataram 256kb/512kb/1Mb/2Mb memory DR-224 Q Dataram 8Mb memory for uVAX DR-244 Q Dataram 1Mb memory for uVAX DR-275 ? Dataram 1Mb memory for VAX 11/750 DR-278 ? Dataram 1-4Mb memory for VAX 11/780 DR-283 Q Dataram 1/2/4Mb memory for uPDP-11 DR-286 ? Dataram 4-16Mb memory for VX8600/8650 DSC-RQD11-SCH Q Sigma disk controller (supports CDC XMD850) DSC-RQD11A/C Q Sigma MFM disk controller. Emulates RQDX2 (supports Seagate 251-4) DT2752 ? Data Translation A/D board. Newer version of DT2782 with burst/increment mode problems fixed DT2762 ? Data Translation A/D board DT2764 ? Data Translation A/D board DT2782 ? Data Translation A/D board DT2784 ? Data Translation A/D board DU132 U Dilog .5" magtape interface. Emulates TM11. 4 drives. Pertec formatted I/O. Replaced by DU142. DU142 U Dilog .5" magtape interface. Emulates TM11. 4 drives. Pertec formatted I/O DU236 U Dilog SMD disk controller. Emulates MSCP. Replaced by DU256. DU256 U Dilog 24 Mhz SMD disk controller, Emulates MSCP, 4 drives. DU312 U Dilog .5" magtape interface DU686 U Dilog 4 x ESDI disk controller. Emulates MSCP. ESDC Q Andromeda ESDI disk controller. Emulates MSCP. (Supports CDC 94196-766, Fujitsu M2263E, Hitachi DK515-78, and Seagate 442) FP105 Q Able Computer 128-port async RS-232 communications board. Emulates 16 x DHV11 or 16 x CXY08 FP106 Q Able Computer 128-port async RS-232 communications board. Emulates 8 x CXA16 Interlink/Uni U Able Computer general purpose DMA interface Replaces DR11-B Interlink/Q Q Able Computer general purpose DMA interface Replaces DR11-B MLSI-TM11 Q MDB 800/1600 BPI Pertec unformatted magtape (3-cable) formatter/controller. Emulates TM11 MLV11 Q General Robotics multifunction module, 128k RAM + 2 serial RS232 I/O MQ100 Q Dilog multifunction board MQ3686 Q Dilog 20 Mhz ESDI & SA450 disk controller, Emulates MSCP, BA4000, Replaces DQ3686 MQ686 Q Dilog disk controller. Emulates MSCP & RX33/50. 4 x ESDI drives + 2 x floppy drives MQ696 Q Dilog disk controller. Emulates MSCP & RX33/50. 2 x ESDI drives + 2 x SA450 floppy drives MQ759 Q Dilog disk/tape adapter. Emulates MSCP & TMSCP. SA450 port, RX33/50 compatible, 7 x SCSI devices + 2 SA450 floppy drives MSV11-Q Q General Robotics 1Mb 22-bit memory for uPDP-11 MSV11-R Q General Robotics 4Mb 22-bit memory, MSV11-P compatible MWV11-A Q Baydel ST506/MFM disk controller. Caution: backplane must not use BC1-BE1 for purposes other than BDAL18-21 NS23S Q National Semiconductor 4k or 4Mb x 18-bit memory PM-CCV11A Q Plessey .25" tape cartridge (CDV11A) interface PM-DCV11A Q Plessey disk controller emulating Digital RK05 (supports Diablo 30) PM-DRV11 Q Plessey parallel interface PM-FCV21B Q Plessey SASI interface, controlling MFM disk(s) emulates 4 x RL02 via a formatter PM-MFV11A Q Plessey multifunction module: 1 RS-232 (console) port, front panel control, bootstrap ROMs, programmable line time clock, Qbus terminator PM-SV128A Q Plessey 128k memory for uPDP-11 PM-WSV31 Q Plessey 8" DSDD floppy disk controller, RX02 compat. Q984 Q AEG (Modicon) Modbus Plus programmable controller QD01/D Q Emulex ST506 disk controller. Emulates KDA50. 22-bit bus. QD21 Q Emulex ESDI disk controller. Emulates MSCP. Has LSI-11 boot, LSI-11 & VAX config and diagnostic programmes in ROM, NVRAM config settings. Q22. QD24 Q Emulex ESDI disk controller. Emulates MSCP. For VAX 3500/3600. QD25 Q Emulex ESDI disk controller. Emulates MSCP. (Supports CDC 766) QD32 Q Emulex SMD-E disk controller. Emulates MSCP. Diagnostic and setup programmes in ROM. NVRAM config settings. Q22. QD33 Q Emulex SMD controller for up to two SMD disks. Supports SMD-0 and SMD-E, with data rates up to 24MHz for SMD-E. MSCP emulation. DMA (uses adaptive techniques and block mode, supports scatter-write and gather-read on the uVAX-I). QD34 Q Emulex SMD-E disk controller. Emulates MSCP. For VAX 3500/3600. QD35 Q Emulex disk controller. Emulates MSCP (Supports Fujitsi M2333) Q/DHU Q Able Computer 8/16-port async RS-232 communications board. Emulates DH11 and DM11, speeds to 38.4kb QHV Q Able Computer 8-port async RS-232 communications board. Emulates DHV11 QHV+ Q Able Computer 16-port async RS-232 communications board. Emulates DHV11, data only QS09 Q Emulex 16-line RS-232 communications controller for VAX 3500/3600. Emulates 2 x CXY08. QT13 Q Emulex tape controller. Emulates TSV05 or TMSCP. 0.5" tape at 800, 1600, 3200, or 6250bpi. QT14 Q Emulex tape controller. Emulates TSV05 or TMSCP. 0.5" tape at 800, 1600, 3200, or 6250bpi. For VAX 3500/3600. QuadrAsync/B U Able Computer async RS-232 communications board Emulates 4 x DL11-B QuadrAsync/C U Able Computer async 20mA communications board Emulates 4 x DL11-C QuadrAsync/E U Able Computer async RS-232 communications board with modem control. Emulates 4 x DL11-E RDC-16 Q See First Technology, MSCP Ram Disk, 16MB RDE-32 Q See First Technology, 32MB extender for RDC-16 RQD11 Q Sigma disk controller (Supports Fujitsu 2246E) -DESDI RQD11-ECP Q Sigma ESDI disk controller (Supports CDC 94196-766 and Hitachi DK515-78) RQD11/EC Q Sigma ESDI disk controller (= Webster WQESD/4) (Supports 760Mb Maxtor XT8760E) RQD11/SCH Q Sigma disk controller (Supports CDC XMD850) Rebus U Able Computer Unibus repeater, replaces DB11-A/H SBCM70 Q LSI-11 with 4 RS-232 lines, DLV11-J compatible, and 512kb-2Mb memory SBCM71 Q LSI-11 with 4 RS-232 lines, DLV11-J compatible, and 256kb-2Mb memory SC01 Q Emulex disk controller SC02/A Q Emulex SMD disk controller. Emulates Digital RP11/RP02/RP03. Includes BDV11-compatible line-time clock. SC02/B Q Emulex SMD disk controller. Emulates Digital RH11/RM02/RM03. SC02/C Q Emulex SMD disk controller. Emulates Digital RK611/RK06/RK07. 22-bit. Supports Fujitsu 2322. Includes BDV11-compatible line-time clock. SC02/L Q Emulex SMD disk controller. Emulates Digital RLV11/RL01/RL02. 22-bit. Includes BDV11-compatible line-time clock. SC02/M Q Emulex SMD disk controller. Emulates ??? Includes BDV11-compatible line-time clock. SC03 Q Emulex SMD disk controller. Emulates RM11/RM03 Includes BDV11-compatible line-time clock. SC03/BX Q Emulex SMD disk controller. Emulates RH11/RH70/RM02/RM05/RM80/RP06 Includes BDV11-compatible line-time clock. SC11 U Emulex disk controller SC12/A U Emulex SMD disk controller. Emulates RP11E/RP02/RP03 SC12/C U Emulex SMD disk controller. Emulates RK611/RK06. Supports CDC 9730-80 & 9448-96, and Priam 3350. SC12/L U Emulex SMD disk controller. Emulates ???? SC12/M U Emulex SMD disk controller. Emulates MSCP SC12/V U Emulex SMD disk controller for VAX. Emulates RK711/RK07. Supports CDC 9730-80 & 9448-96, and Priam 3350. SC21/B U Emulex SMD disk controller. Emulates RH11/RM02 SC21/BM U Emulex SMD disk controller. Emulates RJM02/RJM05 SC21/B2 U Emulex SMD disk controller. Emulates RJP06 SC21/BE U Emulex SMD disk controller. Emulates RJM02/RJM05 SC21/BX U Emulex disk controller SC21/C U Emulex SMD disk controller. Emulates RK611/RK06 SC21/V U Emulex SMD disk controller for vax. Emulates RM03/RM05. Needs Emulex VAX/UM software. SC31/BX U Emulex SMD disk controller. Emulates RH11/RM02/RM03/RM05/RP06. Needs Emulex VAX/UM software to use on VAX. Supports Fujitsu Eagle. SC72/BX U Emulex SMD/MMD disk controller for PDP-11/70 only. Emulates RH70/RM02/RM03/RM05/RP06/RM80. SC750/B1 S Emulex 1-4 SMD disk controller for VAX-11/750 only. Emulates RH750/RP06. SC750/B2 S Emulex 1-4 SMD disk controller for VAX-11/750 only. Emulates RH750/RP06. Supports Fujitsu Eagle, and Memorex 677. SC750/B3 S Emulex 1-4 SMD disk controller for VAX-11/750 only. Emulates RM03. Supports CDC 9762, 9730-80, DM 980, (730-160, and Fujitsu 2248 SC758/B1 C Emulex 1-8 SMD disk controller for VAX-11/750 only. Emulating RM03 and RM05. SC7000/B1 C Emulex 1-4 SMD disk controller for VAX-11/750 and 11/780 (requires V-MASTER). Emulates RM03/RM05/RM80. Supports CDC (762, (710, 9715-160, 9766, 9715-340, 9715-500, 9771, 9775, & 9730-160, CDS T302RM, DF 9330, and Fujitsu 2284, 2294, 2312, 2351A. SC7003 C Emulex 1-4 SMD/SMD-E disk controller for VAX-11/750 and 11/780 (requires V-MASTER). Emulates RM02/RM03/RM05/RM80. SC780 S Emulex disk controller for VAX-11/780. Emulates RM03/RM05/RM80/RP06 SC788/B1 S Emulex SMD disk controller for VAX-11/780. Emulates RM03/RM05/RM80/RP06 SCAT/45 U Able Computer 256k static MOS memory Replaces MS11-A/-B/-C SCDC-11 Q Andromeda SCSI controller. Emulates MSCP. SDC-DLV11J Q Sigma clone of DLV11-J. 4-line SLU. SDC-RLV12 Q Sigma Disk controller. Emulates RLV12/RL02 (Supports Rodime R204) SDC-RQD11 Q Sigma MSCP/ESDI Winchester disk controller -EC SDC-RXV31 Q Sigma floppy disk controller. Emulates RXV21/RX02. (Supports Mitsubishi M2696-63) SDC-DLV11J Q Sigma clone of DLV11-J. 4-line SLU. SM696 Q Dilog disk/tape controller. Emulates MSCP & RX33/50 + 2 x ESDI drives + 2 x SA450 drives SMDC Q Andromeda disk controller. Emulates MSCP. (Includes Fujitsu 2312 and CDC Elite & Sabre) SPE44 - Emulex port expander. Interfaces multiple VAXes to a single bank of SMD-compatible drives. SQ3153 Q Dilog tape coupler 1/2" Pertec formatted I/O. Emulates TMSCP, 4 drives, BA4000 SQ3703A Q Dilog SCSI tape adapter. Emulates TMSCP. BA4000. Replaced by SQ3709 SQ3706A Q Dilog SCSI disk adapter. Emulates MSCP. BA4000. Replaced by SQ3709 SQ3709 Q Dilog SCSI disk/tape adapter. Emulates MSCP and TMSCP. 7 x SCSI devices, BA4000. Replaces SQ3703A & SQ3706A SQ3723A Q Dilog SCSI differential tape adapter. BA4000. Emulates TMSCP. BA4000 SQ3726A Q Dilog SCSI differential disk adapter. Emulates MSCP. SQ703A Q Dilog SCSI tape adapter. Emulates TMSCP Replaced by SQ739 SQ706A Q Dilog SCSI disk adapter. Emulates MSCP. Replaced by SQ739 SQ713A Q Dilog SCSI differential tape adapter. Emulates TMSCP SQ706 Q Dilog SCSI disk controller for Ramstor 5150 SQ739 Q Dilog disk/tape adapter. Emulates MSCP & TMSCP. 7 x SCSI devices. Replaces SQ703A and SQ706A SQ85 Q AEG (Modicon) Modbus Plus communications card STBC Q Baydel multi-function module. 22-bit terminator/bootstrap/line clock/powerfail/control panel. SU723A U Dilog SCSI tape adapter. Emulates TMSCP. 7 drives SU726A U Dilog SCSI disk adapter. Emulates MSCP. 7 drives TC-130 U Western Peripherals tape controller and formatter. 4 UNIBUS modules in a system unit. Interfaces with industry standard non-formatted drives and emulates a TU10. TC01 Q Emulex .5" reel-to-reel tape controller. Emulates TU10 TC01/N Q Emulex .5" reel-to-reel tape controller, TC01/P Q Emulex .5" reel-to-reel tape controller, TC02 Q Emulex Pertec-interface tape drive controller. Emulates TS11. Early revisions incompatible with VMS. TC02 Q Emulex Pertec-interface tape drive controller. Emulates TS11. Early revisions incompatible with VMS. Supports 1-4 Cipher F880, CDC 92181, Kennedy 6809, and Pertec F1000. TC02/FS Q Emulex .5" reel-to-reel tape controller, TC05 Q Emulex CDC Sentinel .25" cartridge tape controller. Emulates TS11. Supports CDC 92192 Sentinel. TC05/SX Q Emulex .5" reel-to-reel tape controller. TC11/N U Emulex .5" reel-to-reel tape controller. Emulating TM11/TU10. TC11/P U Emulex .5" reel-to-reel tape controller. Emulating TM11/TU10. TC11/V U Emulex .5" reel-to-reel tape controller. Emulates MT11/TU10. Needs Emulex VAX/UT software. TC12 U Emulex .5" reel-to-reel tape controller. Emulates TS11. 22-bit. Supports 1-4 Cipher F880, CDC 92181, Kennedy 6809, and Pertec F1000. TC12/FS U Emulex .5" reel-to-reel tape controller, TC13 Q Emulex Pertec-interface tape drive controller. Switchable TU81 TMSCP or TS11 emulation. TC13 U Emulex Pertec-interface tape drive controller. Switchable TU81 TMSCP or TS11 emulation. Supports 1-4 Cipher F880, CDC 92181, Kennedy 6809, and Pertec F1000. TC15 U Emulex CDC Sentinel .25" cartridge tape controller. Emulating Digital TS11. Supports CDC 92192 Sentinel. TC15/SX U Emulex CDC Sentinel .25" cartridge tape controller, TC-130 U Western Peripherals tape controller and formatter. 4 UNIBUS modules in a system unit. Interfaces with industry standard non-formatted drives and emulates a TU10. TC7000 C Emulex .5" reel-to-reel tape controller for VAX-11/750 & 11/780 (with V-MASTER). Emulates TGU77/TEU77. 1-8 Pertec interface drives or 1-4 STC interface drives. TS0100 Q PICO-bus interface for Kennedy 6455 .25" tape cartridge (DC300/DC600) UC01/LX Q Emulex SCSI bus adaptor. Emulates 1-4 RL01/RL02. 22-bit. Includes BDV11-compatible line-time clock and sockets for bootstrap ROMs and bus terminators. UC02 Q Emulex SCSI bus (ANSI X3T9.2) adaptor. Emulates MSCP controller for 1-4 disks. 22-bit. UC03 Q Emulex SCSI bus adaptor. Emulates MSCP controller UC04 Q Emulex SCSI bus adaptor. Emulates MSCP controller UC06D Q Emulex SCSI bus adaptor. UC07D Q Emulex single SCSI bus adaptor. UC08-2 Q Emulex dual SCSI bus adaptor. UC12 U Emulex SCSI bus adaptor. Emulates MSCP controller UC13 U Emulex SCSI bus adaptor. Emulates MSCP controller UC14 U Emulex SCSI bus adaptor. Emulates MSCP controller UD23 U Emulex ESDI disk controller. Emulates UDA50. UD33 U Emulex SMD-E disk controller. Emulating UDA50. V-MASTER S Emulex interface enabling use of SC7000/B1, SC7003, and TC7000 on VAX-11/780. VMZ/32 U Able Computer 16-port async RS-232 communications board. Emulates async ports (only) of DMF32 WDC-11 Q Andromeda controller for Seagate ST251-1 (emulates 2 x RL02) WQESD/4 Q Webster ESDI disk controller (= Sigma RQD11/EC) (Supports 760Mb Maxtor XT8760E) XCV21/31 Q Plessey QumeTrak 8" floppy disk controller QTO Q TD Systems SCSI TMSCP tape controller, LSI-11 & VAX config and diagnostic programmes in ROM, NVRAM config settings. Q22. -*-EndText-*-